Titanium dioxide (TiO 2) is a commonly used electron selective layer in thin-film solar cells. The energy levels of TiO 2 align well with those of most light-absorbing materials and facilitate extracting electrons while blocking the extraction of holes. In a device, this separates charge carriers and reduces recombination. In this study, we have evaluated the hole-blocking behavior of TiO 2 compact layers using charge extraction by linearly increasing voltage in a metal-insulator-semiconductor structure (MIS-CELIV). This hole-blocking property was characterized as surface recombination velocity ( S R) for holes at the interface between a semiconducting polymer and TiO 2 layer. TiO 2 layers of different thicknesses were prepared by sol-gel dip coating on two transparent conductive oxide substrates with different roughnesses. Surface coverage and film quality on both substrates were characterized using X-ray photoelectron spectroscopy and atomic force microscopy, along with its conductive imaging mode. Thicker TiO 2 coatings provided better surface coverage, leading to reduced S R, unless the layers were otherwise defective. We found S R to be a more sensitive indicator of the overall film quality, as varying S R values were still observed among the films that looked similar in their characteristics via other methods.
|DOI - pysyväislinkit|
|Tila||Julkaistu - 12 huhtik. 2022|
|OKM-julkaisutyyppi||A1 Julkaistu artikkeli, soviteltu|