Selective Catalytic Reforming of Methane into Synthesis Gas

Manapkhan Zhumabek>; Gulnar Kaumenova; Diar Augaliev; Yerbolat Alaidar; Dmitry Murzin; Svetlana Tungatarova; Galina Xanthopoulou; Stanislav Kotov; Tolkyn Baizhumanova

doi:10.1002/ceat.202100247

Selective Catalytic Reforming of Methane into Synthesis Gas

Manapkhan Zhumabek>
, Gulnar Kaumenova
, Diar Augaliev
, Yerbolat Alaidar
, Dmitry Murzin
, Svetlana Tungatarova
, Galina Xanthopoulou
, Stanislav Kotov
, Tolkyn Baizhumanova^*

^*Korresponderande författare för detta arbete

Forskningsoutput: Tidskriftsbidrag › Artikel › Vetenskaplig › Peer review

3 Citeringar (Scopus)

Sammanfattning

Syngas is an important product of methane processing of natural gas, from which a wide range of chemical products can be obtained in the future. The results of a study of the developed Ni multicomponent catalysts in the partial oxidation of CH₄ to syngas are presented. A series of samples with different percentages of active components in a Ni-Cr-Al-Mg-glycine catalyst was prepared by the solution combustion synthesis method giving synthesis gas with a high yield. The optimum conditions for the highest yields of H₂ and CO were identified.

Originalspråk	Engelska
Sidor (från-till)	2026-2033
Antal sidor	8
Tidskrift	Chemical Engineering and Technology
Volym	44
Nummer	11
Tidigt onlinedatum	27 aug. 2021
DOI	https://doi.org/10.1002/ceat.202100247
Status	Publicerad - nov. 2021
MoE-publikationstyp	A1 Tidskriftsartikel-refererad

Finansiering

This publication has been done within the project AP 08052090 which is funded by the Ministry of Education and Science of the Republic of Kazakhstan.

Åtkomst av dokument

10.1002/ceat.202100247

Andra filer och länkar

Länk till publikationen i Scopus

Citera det här

@article{9a0a8d47a01d4fffa9d137264bcfe72b,

title = "Selective Catalytic Reforming of Methane into Synthesis Gas",

abstract = "Syngas is an important product of methane processing of natural gas, from which a wide range of chemical products can be obtained in the future. The results of a study of the developed Ni multicomponent catalysts in the partial oxidation of CH4 to syngas are presented. A series of samples with different percentages of active components in a Ni-Cr-Al-Mg-glycine catalyst was prepared by the solution combustion synthesis method giving synthesis gas with a high yield. The optimum conditions for the highest yields of H2 and CO were identified.",

keywords = "Catalytic reforming, Hydrogen, Methane, Solution combustion synthesis, Synthesis gas",

author = "Manapkhan Zhumabek> and Gulnar Kaumenova and Diar Augaliev and Yerbolat Alaidar and Dmitry Murzin and Svetlana Tungatarova and Galina Xanthopoulou and Stanislav Kotov and Tolkyn Baizhumanova",

note = "Funding Information: This publication has been done within the project AP 08052090 which is funded by the Ministry of Education and Science of the Republic of Kazakhstan. Publisher Copyright: {\textcopyright} 2021 Wiley-VCH GmbH",

year = "2021",

month = nov,

doi = "10.1002/ceat.202100247",

language = "English",

volume = "44",

pages = "2026--2033",

journal = "Chemical Engineering and Technology",

issn = "0930-7516",

publisher = "Wiley",

number = "11",

}

TY - JOUR

T1 - Selective Catalytic Reforming of Methane into Synthesis Gas

AU - Zhumabek>, Manapkhan

AU - Kaumenova, Gulnar

AU - Augaliev, Diar

AU - Alaidar, Yerbolat

AU - Murzin, Dmitry

AU - Tungatarova, Svetlana

AU - Xanthopoulou, Galina

AU - Kotov, Stanislav

AU - Baizhumanova, Tolkyn

N1 - Funding Information: This publication has been done within the project AP 08052090 which is funded by the Ministry of Education and Science of the Republic of Kazakhstan. Publisher Copyright: © 2021 Wiley-VCH GmbH

PY - 2021/11

Y1 - 2021/11

N2 - Syngas is an important product of methane processing of natural gas, from which a wide range of chemical products can be obtained in the future. The results of a study of the developed Ni multicomponent catalysts in the partial oxidation of CH4 to syngas are presented. A series of samples with different percentages of active components in a Ni-Cr-Al-Mg-glycine catalyst was prepared by the solution combustion synthesis method giving synthesis gas with a high yield. The optimum conditions for the highest yields of H2 and CO were identified.

AB - Syngas is an important product of methane processing of natural gas, from which a wide range of chemical products can be obtained in the future. The results of a study of the developed Ni multicomponent catalysts in the partial oxidation of CH4 to syngas are presented. A series of samples with different percentages of active components in a Ni-Cr-Al-Mg-glycine catalyst was prepared by the solution combustion synthesis method giving synthesis gas with a high yield. The optimum conditions for the highest yields of H2 and CO were identified.

KW - Catalytic reforming

KW - Hydrogen

KW - Methane

KW - Solution combustion synthesis

KW - Synthesis gas

UR - https://www.scopus.com/pages/publications/85116824428

U2 - 10.1002/ceat.202100247

DO - 10.1002/ceat.202100247

M3 - Article

AN - SCOPUS:85116824428

SN - 0930-7516

VL - 44

SP - 2026

EP - 2033

JO - Chemical Engineering and Technology

JF - Chemical Engineering and Technology

IS - 11

ER -

Selective Catalytic Reforming of Methane into Synthesis Gas

Sammanfattning

Finansiering

Åtkomst av dokument

Andra filer och länkar

Fingeravtryck

Citera det här