Numerical analysis of factors affecting the burden surface and porosity distribution in the upper part of the blast furnace

Han Wei*, Henrik Saxén, Yaowei Yu

*Korresponderande författare för detta arbete

Forskningsoutput: TidskriftsbidragArtikelVetenskapligPeer review

4 Citeringar (Scopus)
13 Nedladdningar (Pure)

Sammanfattning

A proper burden and porosity distribution of the bed in the upper shaft are important prerequisites for realizing a stable and efficient operation of the ironmaking blast furnace. The discrete element method was used to investigate the effects of the static friction coefficient between burden particles and shaft angle on the burden profile and porosity distribution in the bed formed by charging the burden with a bell-less charging equipment. The results indicate that a large static friction coefficient makes the particles stay closer to the impact point (i.e., where they fall) from the rotating chute. A large mixed region of the burden bed decreases the gas permeability, and an increase in the burden particle roughness will worsen this problem. The burden surface shape becomes flatter with an increase in the shaft angle. These findings explain the effect of particle properties and wall geometry on the inner structure of the burden bed.
OriginalspråkEngelska
Artikelnummer292
Antal sidor14
TidskriftMetals
Volym13
Nummer2
DOI
StatusPublicerad - feb. 2023
MoE-publikationstypA1 Tidskriftsartikel-refererad

Fingeravtryck

Fördjupa i forskningsämnen för ”Numerical analysis of factors affecting the burden surface and porosity distribution in the upper part of the blast furnace”. Tillsammans bildar de ett unikt fingeravtryck.

Citera det här