Morphological features of porous silicon carbide obtained via a carbothermal method

Nataliya Shcherban; Svitlana Filonenko; Sergii Sergiienko; Pavel Yaremov; Mykola Skoryk; Volodymir Ilyin; Dmitry Murzin

doi:10.1111/ijac.12757

Morphological features of porous silicon carbide obtained via a carbothermal method

Nataliya Shcherban, Svitlana Filonenko, Sergii Sergiienko, Pavel Yaremov, Mykola Skoryk, Volodymir Ilyin, Dmitry Murzin

Forskningsoutput: Tidskriftsbidrag › Artikel › Vetenskaplig › Peer review

8 Citeringar (Scopus)

Sammanfattning

Samples of porous silicon carbide were obtained using sucrose or carbon and aerosil or silica mesoporous molecular sieves (SBA-3, SBA-15, KIT-6 and MCF). Fibers content in silicon carbide samples is higher when the mesopore surface area of carbon materials derived from carbon-silica composites is lower. Based on the found correlation between the morphology and porosity of SiC and mesopore surface area of the carbon component in the composites, a templating action of carbon in carbothermal reduction was suggested.

Originalspråk	Odefinierat/okänt
Sidor (från-till)	36–41
Tidskrift	International Journal of Applied Ceramic Technology
Volym	15
Nummer	1
DOI	https://doi.org/10.1111/ijac.12757
Status	Publicerad - 2018
MoE-publikationstyp	A1 Tidskriftsartikel-refererad

Åtkomst av dokument

10.1111/ijac.12757

http://onlinelibrary.wiley.com/doi/10.1111/ijac.12757/abstract

Citera det här

@article{2f9f33c1a1254d718bfd578f77418f4a,

title = "Morphological features of porous silicon carbide obtained via a carbothermal method",

abstract = "Samples of porous silicon carbide were obtained using sucrose or carbon and aerosil or silica mesoporous molecular sieves (SBA-3, SBA-15, KIT-6 and MCF). Fibers content in silicon carbide samples is higher when the mesopore surface area of carbon materials derived from carbon-silica composites is lower. Based on the found correlation between the morphology and porosity of SiC and mesopore surface area of the carbon component in the composites, a templating action of carbon in carbothermal reduction was suggested.",

author = "Nataliya Shcherban and Svitlana Filonenko and Sergii Sergiienko and Pavel Yaremov and Mykola Skoryk and Volodymir Ilyin and Dmitry Murzin",

note = "tk.",

year = "2018",

doi = "10.1111/ijac.12757",

language = "Odefinierat/ok{\"a}nt",

volume = "15",

pages = "36–41",

journal = "International Journal of Applied Ceramic Technology",

issn = "1546-542X",

publisher = "Wiley",

number = "1",

}

TY - JOUR

T1 - Morphological features of porous silicon carbide obtained via a carbothermal method

AU - Shcherban, Nataliya

AU - Filonenko, Svitlana

AU - Sergiienko, Sergii

AU - Yaremov, Pavel

AU - Skoryk, Mykola

AU - Ilyin, Volodymir

AU - Murzin, Dmitry

N1 - tk.

PY - 2018

Y1 - 2018

N2 - Samples of porous silicon carbide were obtained using sucrose or carbon and aerosil or silica mesoporous molecular sieves (SBA-3, SBA-15, KIT-6 and MCF). Fibers content in silicon carbide samples is higher when the mesopore surface area of carbon materials derived from carbon-silica composites is lower. Based on the found correlation between the morphology and porosity of SiC and mesopore surface area of the carbon component in the composites, a templating action of carbon in carbothermal reduction was suggested.

AB - Samples of porous silicon carbide were obtained using sucrose or carbon and aerosil or silica mesoporous molecular sieves (SBA-3, SBA-15, KIT-6 and MCF). Fibers content in silicon carbide samples is higher when the mesopore surface area of carbon materials derived from carbon-silica composites is lower. Based on the found correlation between the morphology and porosity of SiC and mesopore surface area of the carbon component in the composites, a templating action of carbon in carbothermal reduction was suggested.

U2 - 10.1111/ijac.12757

DO - 10.1111/ijac.12757

M3 - Artikel

SN - 1546-542X

VL - 15

SP - 36

EP - 41

JO - International Journal of Applied Ceramic Technology

JF - International Journal of Applied Ceramic Technology

IS - 1

ER -