Isomerization of α-pinene oxide over ZSM-5 based micro-mesoporous materials

Nataliya D. Shcherban; Roman Yu. Barakov; Päivi Mäki-Arvela; Sergii A. Sergiienko; Igor Bezverkhyy; Kari Eränen; Dmitry Murzin

doi:10.1016/j.apcata.2018.05.007

Isomerization of α-pinene oxide over ZSM-5 based micro-mesoporous materials

Nataliya D. Shcherban
, Roman Yu. Barakov
, Päivi Mäki-Arvela
, Sergii A. Sergiienko
, Igor Bezverkhyy
, Kari Eränen
, Dmitry Murzin

Forskningsoutput: Tidskriftsbidrag › Artikel › Vetenskaplig › Peer review

33 Citeringar (Scopus)

Sammanfattning

Few types of ZSM-5 based micro-mesoporous materials obtained via a dual template method, steam-assisted conversion and dual-functional templating were evaluated in α-pinene oxide isomerization. Complete conversion and the highest selectivity towards trans-carveol (ca. 40–43%) were achieved over X-ray amorphous micro-mesoporous aluminosilicates as well as mesoporous molecular sieves AlSi-SBA-15. In addition, X-ray amorphous samples containing the secondary building units of ZSM-5 zeolite demonstrated the highest rate of α-pinene oxide isomerization. The yield of the most desired product trans-carveol to a large extent depends on the accessibility of acid sites to the reagents molecules and acidity of the catalysts (strength and concentration of Brønsted and Lewis acid sites).

Originalspråk	Odefinierat/okänt
Sidor (från-till)	236–247
Tidskrift	Applied Catalysis A: General
Volym	560
DOI	https://doi.org/10.1016/j.apcata.2018.05.007
Status	Publicerad - 2018
MoE-publikationstyp	A1 Tidskriftsartikel-refererad

Åtkomst av dokument

10.1016/j.apcata.2018.05.007

https://www.sciencedirect.com/science/article/pii/S0926860X18302291

Citera det här

@article{b092d024eca24c06bee8ed6a02f044c5,

title = "Isomerization of α-pinene oxide over ZSM-5 based micro-mesoporous materials",

abstract = "Few types of ZSM-5 based micro-mesoporous materials obtained via a dual template method, steam-assisted conversion and dual-functional templating were evaluated in α-pinene oxide isomerization. Complete conversion and the highest selectivity towards trans-carveol (ca. 40–43\%) were achieved over X-ray amorphous micro-mesoporous aluminosilicates as well as mesoporous molecular sieves AlSi-SBA-15. In addition, X-ray amorphous samples containing the secondary building units of ZSM-5 zeolite demonstrated the highest rate of α-pinene oxide isomerization. The yield of the most desired product trans-carveol to a large extent depends on the accessibility of acid sites to the reagents molecules and acidity of the catalysts (strength and concentration of Br{\o}nsted and Lewis acid sites).",

author = "Shcherban, \{Nataliya D.\} and Barakov, \{Roman Yu.\} and P{\"a}ivi M{\"a}ki-Arvela and Sergiienko, \{Sergii A.\} and Igor Bezverkhyy and Kari Er{\"a}nen and Dmitry Murzin",

note = "tk. Isomerization of alpha-pinene oxide over ZSM-5 based micro-mesoporous materials",

year = "2018",

doi = "10.1016/j.apcata.2018.05.007",

language = "Odefinierat/ok{\"a}nt",

volume = "560",

pages = "236–247",

journal = "Applied Catalysis A: General",

issn = "0926-860X",

publisher = "Elsevier",

}

TY - JOUR

T1 - Isomerization of α-pinene oxide over ZSM-5 based micro-mesoporous materials

AU - Shcherban, Nataliya D.

AU - Barakov, Roman Yu.

AU - Mäki-Arvela, Päivi

AU - Sergiienko, Sergii A.

AU - Bezverkhyy, Igor

AU - Eränen, Kari

AU - Murzin, Dmitry

N1 - tk. Isomerization of alpha-pinene oxide over ZSM-5 based micro-mesoporous materials

PY - 2018

Y1 - 2018

N2 - Few types of ZSM-5 based micro-mesoporous materials obtained via a dual template method, steam-assisted conversion and dual-functional templating were evaluated in α-pinene oxide isomerization. Complete conversion and the highest selectivity towards trans-carveol (ca. 40–43%) were achieved over X-ray amorphous micro-mesoporous aluminosilicates as well as mesoporous molecular sieves AlSi-SBA-15. In addition, X-ray amorphous samples containing the secondary building units of ZSM-5 zeolite demonstrated the highest rate of α-pinene oxide isomerization. The yield of the most desired product trans-carveol to a large extent depends on the accessibility of acid sites to the reagents molecules and acidity of the catalysts (strength and concentration of Brønsted and Lewis acid sites).

AB - Few types of ZSM-5 based micro-mesoporous materials obtained via a dual template method, steam-assisted conversion and dual-functional templating were evaluated in α-pinene oxide isomerization. Complete conversion and the highest selectivity towards trans-carveol (ca. 40–43%) were achieved over X-ray amorphous micro-mesoporous aluminosilicates as well as mesoporous molecular sieves AlSi-SBA-15. In addition, X-ray amorphous samples containing the secondary building units of ZSM-5 zeolite demonstrated the highest rate of α-pinene oxide isomerization. The yield of the most desired product trans-carveol to a large extent depends on the accessibility of acid sites to the reagents molecules and acidity of the catalysts (strength and concentration of Brønsted and Lewis acid sites).

U2 - 10.1016/j.apcata.2018.05.007

DO - 10.1016/j.apcata.2018.05.007

M3 - Artikel

SN - 0926-860X

VL - 560

SP - 236

EP - 247

JO - Applied Catalysis A: General

JF - Applied Catalysis A: General

ER -