Cone Calorimeter Study of Inorganic Salts as Flame Retardants in Polyurethane Adhesive with Limestone Filler

    Forskningsoutput: TidskriftsbidragArtikelVetenskapligPeer review

    16 Citeringar (Scopus)

    Sammanfattning

    A cone calorimeter was used to test inorganic water-releasing and low-melting compounds as flame retardants in polyurethane adhesive samples. Sodium metasilicate pentahydrate, potassium carbonate mixed with silica gel, sodium hydrogen carbonate, calcium oxalate monohydrate, zinc and magnesium chloride mixed with potassium chloride, aluminium and magnesium hydroxides, ammonium polyphosphate (APP), sodium and potassium phosphates were tested. These additives were used to partially (10-20%) replace the limestone used as a filler in the adhesive. Thermo-gravimetric analysis was used to study decomposition and melting of the inorganic compounds. The results showed that sodium metasilicate monohydrate formed a protective layer of sodium silicate on the sample surface, significantly delaying the time to ignition. Addition of APP resulted in the lowest overall heat release rate curve.
    OriginalspråkOdefinierat/okänt
    Sidor (från-till)1793–1800
    Antal sidor8
    TidskriftJournal of Applied Polymer Science
    Volym123
    Utgåva3
    DOI
    StatusPublicerad - 2012
    MoE-publikationstypA1 Tidskriftsartikel-refererad

    Nyckelord

    • cone calorimeter
    • fire testing
    • flame retardants
    • heat release rate
    • polyurethane adhesive
    • time to ignition

    Citera det här