Comparative evaluation of various lignin determination methods on hemicellulose-rich fractions of spruce and birch obtained by pressurized hot-water extraction (PHWE) and subsequent ultrafiltration (UF)

Risto Korpinen, Mari Kallioinen, Jarl Hemming, Andrey Pranovich, Mika Mänttäri, Stefan Willför

    Forskningsoutput: TidskriftsbidragArtikelVetenskapligPeer review

    5 Citeringar (Scopus)

    Sammanfattning

    Various lignin determination methods have been applied to hemicellulose-rich wood extracts obtained after pressurized hot-water extraction (PHWE) and membrane ultrafiltration (UF). In focus were the chlorine number (Cl no.) method, the acetyl bromide method, and the four modifications of the Klason lignin determination, such as the KCL, TAPPI, LAP, and Goldschmid methods. The furfural (F) and hydroxymethylfurfural (HMF) concentrations in the acid hydrolysates were also determined. The mass balances of the fraction were calculated with respect to the contents of dry solids and lignin, including the acid-soluble lignin. The reliability of the methods was evaluated based on the lignin mass balances and the gross chemical composition of the extracts. Although the results were dependent on the method applied, the lignin mass balance calculations yielded similar results in general.
    OriginalspråkOdefinierat/okänt
    Sidor (från-till)971–979
    TidskriftHolzforschung
    Volym68
    Utgåva8
    DOI
    StatusPublicerad - 2014
    MoE-publikationstypA1 Tidskriftsartikel-refererad

    Nyckelord

    • Acetyl bromide method
    • Acid-soluble lignin
    • Chlorine number
    • Furfural determination
    • Hydroxymethylfurfural (HMF) determination
    • KCL lignin determination
    • Klason lignin
    • Lignin determination
    • Membrane ultrafiltration of biomass
    • Pressurized hot-water extraction (PHWE)
    • TAPPI method of lignin determination

    Citera det här