Co-Pyrolysis Behavior, Kinetic and Mechanism of Waste-Printed Circuit Board with Biomass

Sonalben B Prajapati , Alok Gautam *, Shina Gautam *, Zhitong Yao , Fiseha Tesfaye*, Xiaoshu Lü

*Korresponderande författare för detta arbete

Forskningsoutput: TidskriftsbidragArtikelVetenskapligPeer review

1 Citeringar (Scopus)
29 Nedladdningar (Pure)

Sammanfattning

Waste-printed circuit boards (WPCBs) account for approximately 3–6 wt% of total electronic waste. Due to their content of thermosetting materials and added brominated fire retardants, their recycling and disposal is difficult and not eco-friendly. Pyrolysis as a thermal degradation process may assist in the solution of this problem. In addition, using biomass as an additive can upgrade the bio-oil and fix bromines in the char. In this study, cotton stalk (CS) is chosen as an additive and kinetic of the pyrolysis of three samples namely: PCB, CS, and CS:PCB (50:50) were investigated by the thermogravimetric analyzer (TGA) at heating rates of 5, 10, and 15 K/min. Three non-isothermal methods: FWO, KAS, and Starink were found in good agreement with the TGA data; however, the FWO method was more efficient in the description of the degradation mechanism of solid-state reactions. For CS and CS:PCB (50:50), α was increased from 0.2 to 0.9 with the FWO method, and calculated E α values were found in the range of 121.43–151.88 and 151.60–105.67 kJ/mol in zone 1, while 197.06–79.22 and 115.90–275.06 kJ/mol in zone 2, respectively. Whereas, for PCB in zone 1, E α values were found to be in the range of 190.23–93.88 kJ/mol. The possible decomposition mechanism was determined by the Criado method, which was in agreement with the mechanism model for reaction order n = 3. The oil product was also analyzed using Fourier-Transform Infrared Spectroscopy analysis.

OriginalspråkEngelska
Artikelnummer229
Sidor (från-till)1-21
Antal sidor21
TidskriftProcesses
Volym11
Nummer1
DOI
StatusPublicerad - 10 jan. 2023
MoE-publikationstypA1 Tidskriftsartikel-refererad

Fingeravtryck

Fördjupa i forskningsämnen för ”Co-Pyrolysis Behavior, Kinetic and Mechanism of Waste-Printed Circuit Board with Biomass”. Tillsammans bildar de ett unikt fingeravtryck.

Citera det här