Application of electrokinetic data to test the adsorption models

The effect of adsorption of Gd(III) on the electrokinetic potential of silica (Aerosil, 390 m 2 /g) was studied at various Gd(III) concentrations (ranging from 10 -6 to 10 -2 mol dm -3 ) and at four different solid to liquid ratios (ranging from 0.05 to 8% of silica by weight). Up to some critical concentration of trivalent cations, their effect on the electrokinetic potential of silica is negligible and the sign is negative over the entire studied pH range. This critical concentration increases when the solid to liquid ratio increases. When Gd(III) concentration exceeds the critical value, the magnitude of the negative electrokinetic potential of silica is reduced. This effect is substantial at pH 6 but it is rather insignificant when the pH is very high (pH > 8) or very low (pH < 4). When the Gd(III) concentration is even higher, the sign of the electrokinetic potential is reversed to positive over certain pH range, which depends on the solid to liquid ratio and Gd(III) concentration. The shape of experimental electrokinetic curves of silica in the presence of trivalent cations often shows maximums and double isoelectric points, thus, it is very complex in comparison with the shape of the percentage of uptake vs. pH curves. Therefore, a test of an adsorption model based on electrokinetic curves is much more demanding than a test based merely on uptake vs. pH curves. The parameters of surface complexation model (SCM) derived from analysis of a large set of uptake curves were used to predict the course of electrokinetic curves. The calculated and experimentally observed maximums and isoelectric points do not exactly match (a difference up to one pH unit), but the model curves qualitatively reflect the trends observed in electokinetic experiments.