Analytical quality solid-state composite reference electrode manufactured by injection moulding

    Forskningsoutput: TidskriftsbidragArtikelVetenskapligPeer review

    15 Citeringar (Scopus)

    Sammanfattning

    An injection moulding method was used for fabricating solid-state reference electrodes (Ag/AgCl type) based on a polymer/inorganic salt composite. In this method, a silver/silver chloride wire was placed inside a mould into which the mixture of polymer and inorganic salt was injected. The obtained solid-state composite reference electrodes were extensively tested to study the influence of different parameters such as solution composition, the concentrations and mobility of ions and pH on the potential stability of the electrodes. These experiments revealed that the composite reference electrodes are insensitive to the matrix effect, have excellent potential readings stability and considerably reduced leakage of inorganic salt. The composite reference electrodes were compared favourably to high-quality commercial reference electrodes. It was concluded that the composite reference electrodes obtained by injection moulding are of analytical quality allowing for continuous, prolonged and intensive usage.
    OriginalspråkOdefinierat/okänt
    Sidor (från-till)607–612
    Antal sidor6
    TidskriftJournal of Solid State Electrochemistry
    Volym18
    Utgåva3
    DOI
    StatusPublicerad - 2014
    MoE-publikationstypA1 Tidskriftsartikel-refererad

    Nyckelord

    • Maintenance-free sensor
    • Potentiometry
    • Reference electrode
    • Solid contact

    Citera det här