Selective extraction of hemicelluloses from spruce using switchable ionic liquids

I. Anugwom*, P. Mäki-Arvela, P. Virtanen, S. Willför, R. Sjöholm, J.-P. Mikkola

*Tämän työn vastaava kirjoittaja

Tutkimustuotos: LehtiartikkeliArtikkeliTieteellinenvertaisarvioitu

71 Sitaatiot (Scopus)

Abstrakti

Switchable ionic liquids (SILs) made from alcohols, either hexanol or butanol, and CO 2 together with an amidine (1,8-diazabicyclo-[5.4.0]- undec-7-ene (DBU)) were investigated as dissolution/fractionation solvents for wood material. Both native spruce (Picea abies), and pre-extracted spruce were treated with either butanol SIL (SIL1) or hexanol SIL (SIL2) for 5 days at 55 °C under normal pressure. The SILs were formed by bubbling CO 2 through an equimolar mixture of either 1-hexanol or 1-butanol and DBU. The viscosity of the mixture increased from 7.1 mPa s to 2980 mPa s for SIL2 and 5.1 to 1600 mPa s for SIL1. Melting points of the SILs 1 and 2 were at 8 and 14 °C, respectively. After the treatment time (5 days), the undissolved fraction contained 38 wt.% less hemicelluloses compared to native spruce. There was an increase in the glucose content of the milled spruce treated with both SILs, since the milling step reduced the cellulose crystallinity of the wood and facilitated an easier SIL access into the wood. The solvents were very neutral in terms of lignin removal. Consequently, only about 2% of the lignin was removed from native wood. Moreover, a priori removal of the wood extractives did not influence the lignin removal.

AlkuperäiskieliEnglanti
Sivut2005-2011
Sivumäärä7
JulkaisuCarbohydrate Polymers
Vuosikerta87
Numero3
DOI - pysyväislinkit
TilaJulkaistu - 14 helmikuuta 2012
OKM-julkaisutyyppiA1 Julkaistu artikkeli, soviteltu

Sormenjälki

Sukella tutkimusaiheisiin 'Selective extraction of hemicelluloses from spruce using switchable ionic liquids'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.

Viittausmuodot