Reactions of potassium chloride with chromium as a first step towards high temperature corrosion in biomass combustion

    Tutkimustuotos: Artikkeli kirjassa/raportissa/konferenssijulkaisussaKonferenssiartikkeliTieteellinen


    Reactions between potassium chloride (KCl) and chromium oxide (Cr2O3) as well as pure chromium (Cr) have been studied as model reactions for high temperature corrosion. The compounds have been used as powders because of their big area-to-mass ratio, which results in clearer signals in thermogravimetric measurements. The changes in mass and heat of reaction were measured by means of differential thermal analysis and thermal gravimetry (DTA/TG). The runs were performed mainly in synthetic air, but also nitrogen was used. After the DTA/TG runs the samples were analyzed with a scanning electron microscope (SEM).

    Chromium oxide seems to be inert in the used conditions, but pure chromium reacted with potassium chloride forming chromium oxide as product. In some runs, a yellow intermediate, probably potassium chromate (K2CrO4) was detected. The reaction needs both oxygen and potassium chloride to proceed, but already a tiny amount of potassium chloride is enough to maintain the oxidation of chromium.
    AlkuperäiskieliEi tiedossa
    OtsikkoFinnish-Swedish Flame Days 2009
    TilaJulkaistu - 2009
    OKM-julkaisutyyppiB3 Ei-soviteltu artikkeli konferenssin julkaisusarjassa
    Tapahtumaconference; 2009-01-28; 2009-01-29 - Finnish-Swedish Flame Days 2009
    Kesto: 28 tammikuuta 200929 tammikuuta 2009


    Konferenssiconference; 2009-01-28; 2009-01-29


    • Biomass combustion
    • Chromium
    • High-temperature corrosion