Pyrolysis of waste-derived fuel mixtures containing PVC

R Zevenhoven, EP Axelsen, Mikko Hupa

    Tutkimustuotos: LehtiartikkeliArtikkeliTieteellinenvertaisarvioitu

    53 Sitaatiot (Scopus)

    Abstrakti

    This paper describes an experimental analysis of the pyrolysis of PVC and mixtures of PVC with wood (Finnish pine) and LDPE (low density polyethene) in nitrogen at 250-400 degreesC. The aim is to optimise the temperature range for producing low-chlorine or chlorine-free fuel in a dehydrochlorination reactor without pyrolysing any of the other combustible fractions. Results are presented for various process temperatures for PVC, PVC/wood and PVC/LDPE mixtures. It was found that the PVC tested is dehydrochlorinated at approximately 350 degreesC, and that secondary pyrolysis is suppressed when LDPE is present. (C) 2001 Elsevier Science Ltd. All rights reserved.
    AlkuperäiskieliEi tiedossa
    Sivut507–510
    Sivumäärä4
    JulkaisuFuel
    Vuosikerta81
    Numero4
    DOI - pysyväislinkit
    TilaJulkaistu - 2002
    OKM-julkaisutyyppiA1 Julkaistu artikkeli, soviteltu

    Keywords

    • PVC
    • pyrolysis
    • waste-derived fuels

    Viittausmuodot