Printed all-polymer electrochemical transistors on patterned ion conducting membranes

Nikolai Kaihovirta; Tapio Makela; Xuehan He; Carl-Johan Wikman; Carl-Eric Wilen; Ronald Osterbacka

doi:10.1016/j.orgel.2010.04.025

Printed all-polymer electrochemical transistors on patterned ion conducting membranes

Nikolai Kaihovirta
, Tapio Makela
, Xuehan He
, Carl-Johan Wikman
, Carl-Eric Wilen
, Ronald Osterbacka

Laboratoryservices

Tutkimustuotos: Lehtiartikkeli › Artikkeli › Tieteellinen › vertaisarvioitu

30 Sitaatiot (Scopus)

Abstrakti

We report a simple and roll-to-roll suitable method of manufacturing low-voltage, allpolymer electrochemical transistors (ECTs). The ECTs are built on self-supported and patterned ion conducting membranes that are tailor-made by the electron beam irradiation induced grafting technique. The redox-active poly(3,4-ethylene dioxythiophene)/poly(styrene sulfonate) (PEDOT/PSS) is then printed by flexography onto the membrane in one fabrication step. The ECTs are "normally-on" devices that operate below 2 V. We also utilize overoxidation of PEDOT in order to demonstrate write-once read many times (WORM) memory functionality in the ECT.

Alkuperäiskieli	Englanti
Sivut	1207-1211
Sivumäärä	5
Julkaisu	Organic Electronics
Vuosikerta	11
Numero	7
DOI - pysyväislinkit	https://doi.org/10.1016/j.orgel.2010.04.025
Tila	Julkaistu - heinäk. 2010
OKM-julkaisutyyppi	A1 Julkaistu artikkeli, soviteltu

Rahoitus

N.K. gratefully acknowledges Dr. Kjell-Mikael Källman and Dr. Himadri Majumdar for help with setting up the humidity chamber. Dr. Himadri Majumdar is further acknowledged for fruitful advices regarding the memory functionality. This work was done within the Finnish Funding Agency for Technology and Innovation through the FLEXSENS project. The authors acknowledge partial funding from the Academy of Finland through the National Center of Excellence program.

Pääsy asiakirjaan

10.1016/j.orgel.2010.04.025

Muut tiedostot ja linkit

Linkki julkaisuun Scopuksessa

Viittausmuodot

@article{805d2d66105a4db8ba3b6468e89fead5,

title = "Printed all-polymer electrochemical transistors on patterned ion conducting membranes",

abstract = "We report a simple and roll-to-roll suitable method of manufacturing low-voltage, allpolymer electrochemical transistors (ECTs). The ECTs are built on self-supported and patterned ion conducting membranes that are tailor-made by the electron beam irradiation induced grafting technique. The redox-active poly(3,4-ethylene dioxythiophene)/poly(styrene sulfonate) (PEDOT/PSS) is then printed by flexography onto the membrane in one fabrication step. The ECTs are {"}normally-on{"} devices that operate below 2 V. We also utilize overoxidation of PEDOT in order to demonstrate write-once read many times (WORM) memory functionality in the ECT.",

keywords = "All-polymer, Electrochemical transistor, Organic transistor, PEDOT/PSS, Roll-to-roll, WORM",

author = "Nikolai Kaihovirta and Tapio Makela and Xuehan He and Carl-Johan Wikman and Carl-Eric Wilen and Ronald Osterbacka",

note = "Funding Information: N.K. gratefully acknowledges Dr. Kjell-Mikael K{\"a}llman and Dr. Himadri Majumdar for help with setting up the humidity chamber. Dr. Himadri Majumdar is further acknowledged for fruitful advices regarding the memory functionality. This work was done within the Finnish Funding Agency for Technology and Innovation through the FLEXSENS project. The authors acknowledge partial funding from the Academy of Finland through the National Center of Excellence program. Copyright: Copyright 2019 Elsevier B.V., All rights reserved.",

year = "2010",

month = jul,

doi = "10.1016/j.orgel.2010.04.025",

language = "English",

volume = "11",

pages = "1207--1211",

journal = "Organic Electronics",

issn = "1566-1199",

publisher = "Elsevier",

number = "7",

}

TY - JOUR

T1 - Printed all-polymer electrochemical transistors on patterned ion conducting membranes

AU - Kaihovirta, Nikolai

AU - Makela, Tapio

AU - He, Xuehan

AU - Wikman, Carl-Johan

AU - Wilen, Carl-Eric

AU - Osterbacka, Ronald

N1 - Funding Information: N.K. gratefully acknowledges Dr. Kjell-Mikael Källman and Dr. Himadri Majumdar for help with setting up the humidity chamber. Dr. Himadri Majumdar is further acknowledged for fruitful advices regarding the memory functionality. This work was done within the Finnish Funding Agency for Technology and Innovation through the FLEXSENS project. The authors acknowledge partial funding from the Academy of Finland through the National Center of Excellence program. Copyright: Copyright 2019 Elsevier B.V., All rights reserved.

PY - 2010/7

Y1 - 2010/7

N2 - We report a simple and roll-to-roll suitable method of manufacturing low-voltage, allpolymer electrochemical transistors (ECTs). The ECTs are built on self-supported and patterned ion conducting membranes that are tailor-made by the electron beam irradiation induced grafting technique. The redox-active poly(3,4-ethylene dioxythiophene)/poly(styrene sulfonate) (PEDOT/PSS) is then printed by flexography onto the membrane in one fabrication step. The ECTs are "normally-on" devices that operate below 2 V. We also utilize overoxidation of PEDOT in order to demonstrate write-once read many times (WORM) memory functionality in the ECT.

AB - We report a simple and roll-to-roll suitable method of manufacturing low-voltage, allpolymer electrochemical transistors (ECTs). The ECTs are built on self-supported and patterned ion conducting membranes that are tailor-made by the electron beam irradiation induced grafting technique. The redox-active poly(3,4-ethylene dioxythiophene)/poly(styrene sulfonate) (PEDOT/PSS) is then printed by flexography onto the membrane in one fabrication step. The ECTs are "normally-on" devices that operate below 2 V. We also utilize overoxidation of PEDOT in order to demonstrate write-once read many times (WORM) memory functionality in the ECT.

KW - All-polymer

KW - Electrochemical transistor

KW - Organic transistor

KW - PEDOT/PSS

KW - Roll-to-roll

KW - WORM

UR - https://www.scopus.com/pages/publications/78149469152

U2 - 10.1016/j.orgel.2010.04.025

DO - 10.1016/j.orgel.2010.04.025

M3 - Article

AN - SCOPUS:78149469152

SN - 1566-1199

VL - 11

SP - 1207

EP - 1211

JO - Organic Electronics

JF - Organic Electronics

IS - 7

ER -

Printed all-polymer electrochemical transistors on patterned ion conducting membranes

Abstrakti

Rahoitus

Pääsy asiakirjaan

Muut tiedostot ja linkit

Sormenjälki

Viittausmuodot