Particulate emissions from large-scale medium-speed diesel engines: 2. Chemical composition

Arto Sarvi, Jussi Lyyränen, Jorma Jokiniemi, Ron Zevenhoven*

*Tämän työn vastaava kirjoittaja

    Tutkimustuotos: LehtiartikkeliArtikkeliTieteellinenvertaisarvioitu

    20 Sitaatiot (Scopus)


    The effect of diesel fuel and operation mode on diesel particulate matter (PM) emissions was studied using a combination of a gravimetric impactor (DGI) and SEM/EDX analysis of PM particles from 0.005 to 2.5 μm aerodynamic size. Tests were made with heavy fuel oil (HFO) and light fuel oil (LFO) with medium speed (500 rpm), turbo-charged, power per cylinder ~1 MW, multivariable large-scale diesel engines. Diesel PM was sampled from diluted and cooled exhaust gases. The sampled PM was found to be primarily made of carbon and sulphur derived from the fuel and lube oil but contain several other chemical species as well. In this paper the submicron particle size range (0.2-0.5 μm and 0.5-1.0 μm) is discussed. The EDX analysis gave reasonably accurate quantitative results featuring the important elements present in the samples, namely, C, O, Mg, Si, S, Cl, Ca, V, Fe, Ni, Zn (and Al). The results indicate that the finest particles originate primarily from the fuel while the somewhat larger particles contain also significant amounts of elements derived from the lubrication oil. As expected, the concentrations of sulphur and certain metallic elements such as V, Ni, Ca, Zn, Fe, Mg are significantly higher in diesel PM from HFO firing than for LFO firing.

    JulkaisuFuel Processing Technology
    DOI - pysyväislinkit
    TilaJulkaistu - lokakuuta 2011
    OKM-julkaisutyyppiA1 Julkaistu artikkeli, soviteltu

    Sormenjälki Sukella tutkimusaiheisiin 'Particulate emissions from large-scale medium-speed diesel engines: 2. Chemical composition'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.