Optimization of the extraction of galactoglucomannans from Pinus halepensis

The effectiveness of pressurized hot-water extraction conditions for obtaining galactoglucomannans (GGMs) from Pinus halepensis suitable for applications like coatings and films packaging was investigated. For this purpose, high molar masses with high yields are required, presenting a serious challenge for hot-water extraction processes. The extraction of GGMs was carried out in an accelerated solvent extractor (ASE) and the isolation was performed by precipitation in ethanol. Three temperatures in the range 160-180 °C and five extraction times 5-90 min were tested in order to optimize extraction parameters of GGMs, avoiding thermal and chemical degradation in hot-water. Total dissolved solids (TDS) were determined gravimetrically after freeze-drying and weight average molar masses (Mw) were determined by high-performance size exclusion chromatography (HPSEC). Total non-cellulosic carbohydrates were determined by gas chromatography (GC) after acid methanolysis. Free monomers were additionally analyzed by GC. Lignin in water extracts was measured by an ultraviolet (UV) method. Acetic acid was determined after alkaline hydrolysis of acetyl groups and analyzed by HPSEC. The main parameters influencing the extraction processes of the GGMs, namely, extraction time and temperature were studied. Optimal extraction parameters of GGMs were identified at 170 °C and 20 min extraction time, with average Mw of extracted fraction of 7 kDa leading to a GGM yield of approximately 56 mg g o. d. m - 1 ${\text{mgg}}_{\text{o}.\text{d}.\text{m}}^{-1}$, corresponding to 6% on dry wood basis.