On changes in bed-material particles from a 550 MWth CFB boiler burning coal, bark and peat

V Barisic; Mikko Hupa

doi:10.1016/j.fuel.2006.07.016

On changes in bed-material particles from a 550 MWth CFB boiler burning coal, bark and peat

V Barisic, Mikko Hupa

Tutkimustuotos: Lehtiartikkeli › Artikkeli › Tieteellinen › vertaisarvioitu

11 Sitaatiot (Scopus)

Abstrakti

This paper presents our observations on coating build up, morphology and the elemental composition of bed-material particles collected from a 550 MWth CFB boiler burning coal, bark and peat fuel/fuel mixture. The special focus was on the changes of the elemental composition of coating layer on bed-material particles when different fuels were burned. The results were obtained using a scanning electron microscope coupled with an energy depressive X-ray analyser (SEM/EDX). The results clearly show that properties of bed-material particles are a result of complex interaction between the fuels burned previously, and the fuels used at the time of sampling.

Alkuperäiskieli	Ei tiedossa
Sivut	464–468
Sivumäärä	5
Julkaisu	Fuel
Vuosikerta	86
Numero	3
DOI - pysyväislinkit	https://doi.org/10.1016/j.fuel.2006.07.016
Tila	Julkaistu - 2007
OKM-julkaisutyyppi	A1 Julkaistu artikkeli, soviteltu

Keywords

bed-material particles
coating
cross-sectional SEM/EDX analysis

Pääsy asiakirjaan

10.1016/j.fuel.2006.07.016

Viittausmuodot

@article{5be6b7885e29490e85412edce9acfdd9,

title = "On changes in bed-material particles from a 550 MWth CFB boiler burning coal, bark and peat",

abstract = "This paper presents our observations on coating build up, morphology and the elemental composition of bed-material particles collected from a 550 MWth CFB boiler burning coal, bark and peat fuel/fuel mixture. The special focus was on the changes of the elemental composition of coating layer on bed-material particles when different fuels were burned. The results were obtained using a scanning electron microscope coupled with an energy depressive X-ray analyser (SEM/EDX). The results clearly show that properties of bed-material particles are a result of complex interaction between the fuels burned previously, and the fuels used at the time of sampling.",

keywords = "bed-material particles, coating, cross-sectional SEM/EDX analysis, bed-material particles, coating, cross-sectional SEM/EDX analysis, bed-material particles, coating, cross-sectional SEM/EDX analysis",

author = "V Barisic and Mikko Hupa",

year = "2007",

doi = "10.1016/j.fuel.2006.07.016",

language = "Odefinierat/ok{\"a}nt",

volume = "86",

pages = "464–468",

journal = "Fuel",

issn = "0016-2361",

publisher = "Elsevier",

number = "3",

}

TY - JOUR

T1 - On changes in bed-material particles from a 550 MWth CFB boiler burning coal, bark and peat

AU - Barisic, V

AU - Hupa, Mikko

PY - 2007

Y1 - 2007

N2 - This paper presents our observations on coating build up, morphology and the elemental composition of bed-material particles collected from a 550 MWth CFB boiler burning coal, bark and peat fuel/fuel mixture. The special focus was on the changes of the elemental composition of coating layer on bed-material particles when different fuels were burned. The results were obtained using a scanning electron microscope coupled with an energy depressive X-ray analyser (SEM/EDX). The results clearly show that properties of bed-material particles are a result of complex interaction between the fuels burned previously, and the fuels used at the time of sampling.

AB - This paper presents our observations on coating build up, morphology and the elemental composition of bed-material particles collected from a 550 MWth CFB boiler burning coal, bark and peat fuel/fuel mixture. The special focus was on the changes of the elemental composition of coating layer on bed-material particles when different fuels were burned. The results were obtained using a scanning electron microscope coupled with an energy depressive X-ray analyser (SEM/EDX). The results clearly show that properties of bed-material particles are a result of complex interaction between the fuels burned previously, and the fuels used at the time of sampling.

KW - bed-material particles

KW - coating

KW - cross-sectional SEM/EDX analysis

KW - bed-material particles

KW - coating

KW - cross-sectional SEM/EDX analysis

KW - bed-material particles

KW - coating

KW - cross-sectional SEM/EDX analysis

U2 - 10.1016/j.fuel.2006.07.016

DO - 10.1016/j.fuel.2006.07.016

M3 - Artikel

SN - 0016-2361

VL - 86

SP - 464

EP - 468

JO - Fuel

JF - Fuel

IS - 3

ER -