Abstrakti
Large area printed conductive surfaces are expected to have an impact on printed functionality ranging from electronics to photonics such as printed solar cells. We report here a study on formation of such conductive surfaces by flexographic printing using a PEDOT:PSS conductive ink on various coated papers. Printability of multilayer coated paper and TiO2 nanoparticle coated paperboard generated by the liquid flame spray process are compared to plastic film typically used in printed functionality applications. The wettability of TiO and superhydrophilic states by ultraviolet light. It is observed that superhydrophobicity of paperboard induced by TiO2 nanoparticle coating can be altered between superhydrophobic nanoparticles results in poorer ink setting with the water-based PEDOT:PSS yielding lower conductivities. Therefore, we observe conductivity only after several successive prints. A solvent-based silver ink was used for comparison. It is believed that renewable natural fibre based substrates, such as coated paper meeting criteria for sustainable development will find more applications in the future.
Alkuperäiskieli | Englanti |
---|---|
Sivut | 7–13 |
Julkaisu | Journal of print and media technology research |
Vuosikerta | 2 |
Numero | 1 |
Tila | Julkaistu - 8 helmik. 2013 |
OKM-julkaisutyyppi | A1 Julkaistu artikkeli, soviteltu |
Keywords
- printing
- wettability
- flexography
- TiO2 nanoparticle
Sormenjälki
Sukella tutkimusaiheisiin 'Flexographic printing of PEDOT:PSS on coated papers for printed functionality'. Ne muodostavat yhdessä ainutlaatuisen sormenjäljen.Laitteet
-
Åbo Akademi Functional Printing Center
Martti Toivakka (PI), Jessica Rosenholm (PI), Nicklas Anttu (PI), Johan Bobacka (PI), Tan Phat Huynh (PI), Jouko Peltonen (PI), Xiaoju Wang (PI), Carl-Eric Wilen (PI), Chunlin Xu (PI), Hongbo Zhang (PI) & Ronald Österbacka (PI)
Faculty of Science and EngineeringLaitteistot/tilat: Laitos