Electrodeposition of PEDOT-Cl film on a fully printed Ag/polyaniline electrode

Petri Ihalainen; Anni Määttänen; Ulriika Mattinen; Milena Stepien; Roger Bollström; Martti Toivakka; Johan Bobacka; Jouko Peltonen

doi:10.1016/j.tsf.2010.11.032

Electrodeposition of PEDOT-Cl film on a fully printed Ag/polyaniline electrode

Petri Ihalainen, Anni Määttänen, Ulriika Mattinen, Milena Stepien, Roger Bollström, Martti Toivakka, Johan Bobacka, Jouko Peltonen

Tutkimustuotos: Lehtiartikkeli › Artikkeli › Tieteellinen › vertaisarvioitu

23 Sitaatiot (Scopus)

Abstrakti

Electrodeposition of poly(3,4-ethylenedioxythiophene) doped with chloride (PEDOT-Cl) on a paper substrate is demonstrated. A fully printed silver/polyaniline (Ag/PANI) layer-by-layer structure on a pigment coated paper acted as a working electrode, on which a layer of PEDOT-Cl was galvanostatically grown in an electrochemical cell. The deposited PEDOT-Cl appeared as a dark-blue circular area on a green Ag/PANI electrode. The electrodeposition was further confirmed by chemical and topographical analyses. The results demonstrate the potential of low-cost paper substrates and roll-to-roll mass-manufacturing methods in electrochemical applications.

Alkuperäiskieli	Ei tiedossa
Sivut	2172–2175
Sivumäärä	4
Julkaisu	Thin Solid Films
Vuosikerta	519
Numero	7
DOI - pysyväislinkit	https://doi.org/10.1016/j.tsf.2010.11.032
Tila	Julkaistu - 2011
OKM-julkaisutyyppi	A1 Julkaistu artikkeli, soviteltu

Keywords

Atomic force microscopy
Conductive ink
Electrochemical deposition
Inkjet printing
Paper
Poly(3,4-ethylenedioxythiophene)
Polyaniline
Secondary Ion Mass Spectroscopy

Pääsy asiakirjaan

10.1016/j.tsf.2010.11.032

Åbo Akademi Functional Printing Center
Toivakka, M. (PI), Rosenholm, J. (PI), Anttu, N. (PI), Bobacka, J. (PI), Huynh, T. P. (PI), Peltonen, J. (PI), Wang, X. (PI), Wilen, C.-E. (PI), Xu, C. (PI), Zhang, H. (PI) & Österbacka, R. (PI)
Faculty of Science and Engineering
Laitteistot/tilat: Laitos

Viittausmuodot

@article{4ee8407adc9a4e91b21069694d689c4e,

title = "Electrodeposition of PEDOT-Cl film on a fully printed Ag/polyaniline electrode",

abstract = "Electrodeposition of poly(3,4-ethylenedioxythiophene) doped with chloride (PEDOT-Cl) on a paper substrate is demonstrated. A fully printed silver/polyaniline (Ag/PANI) layer-by-layer structure on a pigment coated paper acted as a working electrode, on which a layer of PEDOT-Cl was galvanostatically grown in an electrochemical cell. The deposited PEDOT-Cl appeared as a dark-blue circular area on a green Ag/PANI electrode. The electrodeposition was further confirmed by chemical and topographical analyses. The results demonstrate the potential of low-cost paper substrates and roll-to-roll mass-manufacturing methods in electrochemical applications.",

keywords = "Atomic force microscopy, Conductive ink, Electrochemical deposition, Inkjet printing, Paper, Poly(3,4-ethylenedioxythiophene), Polyaniline, Secondary Ion Mass Spectroscopy, Atomic force microscopy, Conductive ink, Electrochemical deposition, Inkjet printing, Paper, Poly(3,4-ethylenedioxythiophene), Polyaniline, Secondary Ion Mass Spectroscopy, Atomic force microscopy, Conductive ink, Electrochemical deposition, Inkjet printing, Paper, Poly(3,4-ethylenedioxythiophene), Polyaniline, Secondary Ion Mass Spectroscopy",

author = "Petri Ihalainen and Anni M{\"a}{\"a}tt{\"a}nen and Ulriika Mattinen and Milena Stepien and Roger Bollstr{\"o}m and Martti Toivakka and Johan Bobacka and Jouko Peltonen",

year = "2011",

doi = "10.1016/j.tsf.2010.11.032",

language = "Odefinierat/ok{\"a}nt",

volume = "519",

pages = "2172–2175",

journal = "Thin Solid Films",

issn = "0040-6090",

publisher = "Elsevier",

number = "7",

}

TY - JOUR

T1 - Electrodeposition of PEDOT-Cl film on a fully printed Ag/polyaniline electrode

AU - Ihalainen, Petri

AU - Määttänen, Anni

AU - Mattinen, Ulriika

AU - Stepien, Milena

AU - Bollström, Roger

AU - Toivakka, Martti

AU - Bobacka, Johan

AU - Peltonen, Jouko

PY - 2011

Y1 - 2011

N2 - Electrodeposition of poly(3,4-ethylenedioxythiophene) doped with chloride (PEDOT-Cl) on a paper substrate is demonstrated. A fully printed silver/polyaniline (Ag/PANI) layer-by-layer structure on a pigment coated paper acted as a working electrode, on which a layer of PEDOT-Cl was galvanostatically grown in an electrochemical cell. The deposited PEDOT-Cl appeared as a dark-blue circular area on a green Ag/PANI electrode. The electrodeposition was further confirmed by chemical and topographical analyses. The results demonstrate the potential of low-cost paper substrates and roll-to-roll mass-manufacturing methods in electrochemical applications.

AB - Electrodeposition of poly(3,4-ethylenedioxythiophene) doped with chloride (PEDOT-Cl) on a paper substrate is demonstrated. A fully printed silver/polyaniline (Ag/PANI) layer-by-layer structure on a pigment coated paper acted as a working electrode, on which a layer of PEDOT-Cl was galvanostatically grown in an electrochemical cell. The deposited PEDOT-Cl appeared as a dark-blue circular area on a green Ag/PANI electrode. The electrodeposition was further confirmed by chemical and topographical analyses. The results demonstrate the potential of low-cost paper substrates and roll-to-roll mass-manufacturing methods in electrochemical applications.

KW - Atomic force microscopy

KW - Conductive ink

KW - Electrochemical deposition

KW - Inkjet printing

KW - Paper

KW - Poly(3,4-ethylenedioxythiophene)

KW - Polyaniline

KW - Secondary Ion Mass Spectroscopy

KW - Atomic force microscopy

KW - Conductive ink

KW - Electrochemical deposition

KW - Inkjet printing

KW - Paper

KW - Poly(3,4-ethylenedioxythiophene)

KW - Polyaniline

KW - Secondary Ion Mass Spectroscopy

KW - Atomic force microscopy

KW - Conductive ink

KW - Electrochemical deposition

KW - Inkjet printing

KW - Paper

KW - Poly(3,4-ethylenedioxythiophene)

KW - Polyaniline

KW - Secondary Ion Mass Spectroscopy

U2 - 10.1016/j.tsf.2010.11.032

DO - 10.1016/j.tsf.2010.11.032

M3 - Artikel

SN - 0040-6090

VL - 519

SP - 2172

EP - 2175

JO - Thin Solid Films

JF - Thin Solid Films

IS - 7

ER -

Electrodeposition of PEDOT-Cl film on a fully printed Ag/polyaniline electrode

Abstrakti

Keywords

Pääsy asiakirjaan

Laitteet

Åbo Akademi Functional Printing Center

Viittausmuodot