Titania and titania-silver nanoparticle deposits made by Liquid Flame Spray and their functionality as photocatalyst for organic- and biofilm removal

Helmi Keskinen; Jyrki M. Mäkelä; Mikko Aromaa; Jorma Keskinen; Sami Areva; Cilâine V. Teixeira; Jarl B. Rosenholm; Viljami Pore; Mikko Ritala; Markku Leskelä; Mari Raulio; Mirja S. Salkinoja-Salonen; Erkki Levänen; Tapio Mäntylä

doi:10.1007/s10562-006-0138-3

Titania and titania-silver nanoparticle deposits made by Liquid Flame Spray and their functionality as photocatalyst for organic- and biofilm removal

Helmi Keskinen, Jyrki M. Mäkelä, Mikko Aromaa, Jorma Keskinen, Sami Areva, Cilâine V. Teixeira, Jarl B. Rosenholm, Viljami Pore, Mikko Ritala, Markku Leskelä, Mari Raulio, Mirja S. Salkinoja-Salonen, Erkki Levänen, Tapio Mäntylä

Laboratory of Molecular Science and Engineering

Research output: Contribution to journal › Article › Scientific › peer-review

51 Citations (Scopus)

Abstract

Titania and titania-silver nanoparticle deposits were made by Liquid Flame Spray technique, in which the liquid precursor is injected into a high temperature flame, where it will evaporate and nucleate to nanosize particles. One-step and two-step methods were used for preparation of titania-silver deposits. The amount of silver added was 1 wt%. The deposits were collected in the flame zone on steel and glass surfaces and were analyzed by TEM, EDS, XPS and SAXS. The titania deposits consisted of porous nanosized titania agglomerates of primary particles (∼10 nm). With silver addition, small spherical silver metal particles (∼ 2 nm) were detected on the agglomerates. An increase in the photocatalytic activity was verified by stearic acid decomposition and biofilm removal using Deinococcus geothermalis as the model organism. © Springer Science+Business Media, Inc. 2006.

Original language	English
Pages (from-to)	127-132
Number of pages	6
Journal	Catalysis Letters
Volume	111
Issue number	3-4
DOIs	https://doi.org/10.1007/s10562-006-0138-3
Publication status	Published - 2006
MoE publication type	A1 Journal article-refereed

Keywords

Deposits
Liquid flame spray
Photocatalyst
Titanium dioxide

Access to Document

10.1007/s10562-006-0138-3

Cite this

Keskinen, H., Mäkelä, J. M., Aromaa, M., Keskinen, J., Areva, S., Teixeira, C. V., Rosenholm, J. B., Pore, V., Ritala, M., Leskelä, M., Raulio, M., Salkinoja-Salonen, M. S., Levänen, E., & Mäntylä, T. (2006). Titania and titania-silver nanoparticle deposits made by Liquid Flame Spray and their functionality as photocatalyst for organic- and biofilm removal. Catalysis Letters, 111(3-4), 127-132. https://doi.org/10.1007/s10562-006-0138-3

@article{13cc46d2aa434c7f8a6a5cac168d0920,

title = "Titania and titania-silver nanoparticle deposits made by Liquid Flame Spray and their functionality as photocatalyst for organic- and biofilm removal",

abstract = "Titania and titania-silver nanoparticle deposits were made by Liquid Flame Spray technique, in which the liquid precursor is injected into a high temperature flame, where it will evaporate and nucleate to nanosize particles. One-step and two-step methods were used for preparation of titania-silver deposits. The amount of silver added was 1 wt%. The deposits were collected in the flame zone on steel and glass surfaces and were analyzed by TEM, EDS, XPS and SAXS. The titania deposits consisted of porous nanosized titania agglomerates of primary particles (∼10 nm). With silver addition, small spherical silver metal particles (∼ 2 nm) were detected on the agglomerates. An increase in the photocatalytic activity was verified by stearic acid decomposition and biofilm removal using Deinococcus geothermalis as the model organism. {\textcopyright} Springer Science+Business Media, Inc. 2006.",

keywords = "Deposits, Liquid flame spray, Photocatalyst, Titanium dioxide",

author = "Helmi Keskinen and M{\"a}kel{\"a}, {Jyrki M.} and Mikko Aromaa and Jorma Keskinen and Sami Areva and Teixeira, {Cil{\^a}ine V.} and Rosenholm, {Jarl B.} and Viljami Pore and Mikko Ritala and Markku Leskel{\"a} and Mari Raulio and Salkinoja-Salonen, {Mirja S.} and Erkki Lev{\"a}nen and Tapio M{\"a}ntyl{\"a}",

year = "2006",

doi = "10.1007/s10562-006-0138-3",

language = "English",

volume = "111",

pages = "127--132",

journal = "Catalysis Letters",

issn = "1011-372X",

publisher = "Springer",

number = "3-4",

}

Keskinen, H, Mäkelä, JM, Aromaa, M, Keskinen, J, Areva, S, Teixeira, CV, Rosenholm, JB, Pore, V, Ritala, M, Leskelä, M, Raulio, M, Salkinoja-Salonen, MS, Levänen, E & Mäntylä, T 2006, 'Titania and titania-silver nanoparticle deposits made by Liquid Flame Spray and their functionality as photocatalyst for organic- and biofilm removal', Catalysis Letters, vol. 111, no. 3-4, pp. 127-132. https://doi.org/10.1007/s10562-006-0138-3

TY - JOUR

T1 - Titania and titania-silver nanoparticle deposits made by Liquid Flame Spray and their functionality as photocatalyst for organic- and biofilm removal

AU - Keskinen, Helmi

AU - Mäkelä, Jyrki M.

AU - Aromaa, Mikko

AU - Keskinen, Jorma

AU - Areva, Sami

AU - Teixeira, Cilâine V.

AU - Rosenholm, Jarl B.

AU - Pore, Viljami

AU - Ritala, Mikko

AU - Leskelä, Markku

AU - Raulio, Mari

AU - Salkinoja-Salonen, Mirja S.

AU - Levänen, Erkki

AU - Mäntylä, Tapio

PY - 2006

Y1 - 2006

N2 - Titania and titania-silver nanoparticle deposits were made by Liquid Flame Spray technique, in which the liquid precursor is injected into a high temperature flame, where it will evaporate and nucleate to nanosize particles. One-step and two-step methods were used for preparation of titania-silver deposits. The amount of silver added was 1 wt%. The deposits were collected in the flame zone on steel and glass surfaces and were analyzed by TEM, EDS, XPS and SAXS. The titania deposits consisted of porous nanosized titania agglomerates of primary particles (∼10 nm). With silver addition, small spherical silver metal particles (∼ 2 nm) were detected on the agglomerates. An increase in the photocatalytic activity was verified by stearic acid decomposition and biofilm removal using Deinococcus geothermalis as the model organism. © Springer Science+Business Media, Inc. 2006.

AB - Titania and titania-silver nanoparticle deposits were made by Liquid Flame Spray technique, in which the liquid precursor is injected into a high temperature flame, where it will evaporate and nucleate to nanosize particles. One-step and two-step methods were used for preparation of titania-silver deposits. The amount of silver added was 1 wt%. The deposits were collected in the flame zone on steel and glass surfaces and were analyzed by TEM, EDS, XPS and SAXS. The titania deposits consisted of porous nanosized titania agglomerates of primary particles (∼10 nm). With silver addition, small spherical silver metal particles (∼ 2 nm) were detected on the agglomerates. An increase in the photocatalytic activity was verified by stearic acid decomposition and biofilm removal using Deinococcus geothermalis as the model organism. © Springer Science+Business Media, Inc. 2006.

KW - Deposits

KW - Liquid flame spray

KW - Photocatalyst

KW - Titanium dioxide

UR - https://www.mendeley.com/catalogue/d3940f56-df2c-3dfc-9851-00a28c674552/

U2 - 10.1007/s10562-006-0138-3

DO - 10.1007/s10562-006-0138-3

M3 - Article

SN - 1011-372X

VL - 111

SP - 127

EP - 132

JO - Catalysis Letters

JF - Catalysis Letters

IS - 3-4

ER -

Titania and titania-silver nanoparticle deposits made by Liquid Flame Spray and their functionality as photocatalyst for organic- and biofilm removal

Abstract

Keywords

Access to Document

Other files and links

Fingerprint

Cite this