Creation of bioactive glass coating on titanium by local laser irradiation - Part I: Optimization of the processing parameters

N Moritz; E Vedel; H Ylanen; M Jokinen; Mikko Hupa; A Yli-Urpo

Creation of bioactive glass coating on titanium by local laser irradiation - Part I: Optimization of the processing parameters

N Moritz
, E Vedel
, H Ylanen
, M Jokinen
, Mikko Hupa
, A Yli-Urpo

Research output: Contribution to journal › Article › Scientific › peer-review

8 Citations (Scopus)

Abstract

A focused CO2 laser beam was used to create coatings of bioactive glass on titanium substrates. Beam position remained fixed, while a computer-controlled motor stage was utilized to scan the specimens through the beam. Processing was performed in an atmosphere of air or N-2. Processing parameters, such as number of coating layers and laser power, were optimized to produce optimal results in terms of in vitro bioactivity of the coating.

Original language	Undefined/Unknown
Pages (from-to)	221–224
Number of pages	4
Journal	Key Engineering Materials
Volume	240-242
Publication status	Published - 2003
MoE publication type	A1 Journal article-refereed

Keywords

bioactive coatings
CO2 laser

Cite this

@article{c5db00c83bba4d3ab4c24ef8bed81ffd,

title = "Creation of bioactive glass coating on titanium by local laser irradiation - Part I: Optimization of the processing parameters",

abstract = "A focused CO2 laser beam was used to create coatings of bioactive glass on titanium substrates. Beam position remained fixed, while a computer-controlled motor stage was utilized to scan the specimens through the beam. Processing was performed in an atmosphere of air or N-2. Processing parameters, such as number of coating layers and laser power, were optimized to produce optimal results in terms of in vitro bioactivity of the coating.",

keywords = "bioactive coatings, CO2 laser, bioactive coatings, CO2 laser, bioactive coatings, CO2 laser",

author = "N Moritz and E Vedel and H Ylanen and M Jokinen and Mikko Hupa and A Yli-Urpo",

year = "2003",

language = "Odefinierat/ok{\"a}nt",

volume = "240-242",

pages = "221–224",

journal = "Key Engineering Materials",

issn = "1013-9826",

publisher = "Trans Tech Publications",

}

TY - JOUR

T1 - Creation of bioactive glass coating on titanium by local laser irradiation - Part I: Optimization of the processing parameters

AU - Moritz, N

AU - Vedel, E

AU - Ylanen, H

AU - Jokinen, M

AU - Hupa, Mikko

AU - Yli-Urpo, A

PY - 2003

Y1 - 2003

N2 - A focused CO2 laser beam was used to create coatings of bioactive glass on titanium substrates. Beam position remained fixed, while a computer-controlled motor stage was utilized to scan the specimens through the beam. Processing was performed in an atmosphere of air or N-2. Processing parameters, such as number of coating layers and laser power, were optimized to produce optimal results in terms of in vitro bioactivity of the coating.

AB - A focused CO2 laser beam was used to create coatings of bioactive glass on titanium substrates. Beam position remained fixed, while a computer-controlled motor stage was utilized to scan the specimens through the beam. Processing was performed in an atmosphere of air or N-2. Processing parameters, such as number of coating layers and laser power, were optimized to produce optimal results in terms of in vitro bioactivity of the coating.

KW - bioactive coatings

KW - CO2 laser

KW - bioactive coatings

KW - CO2 laser

KW - bioactive coatings

KW - CO2 laser

M3 - Artikel

SN - 1013-9826

VL - 240-242

SP - 221

EP - 224

JO - Key Engineering Materials

JF - Key Engineering Materials

ER -