Biodiesel production from acid oils using sulfonated carbon catalyst derived from oil-cake waste

Lakhya Jyoti Konwar, Rupali Das, Ashim Jyoti Thakur, Eero Salminen, Päivi Mäki-Arvela, Narendra Kumar, Jyri-Pekka Mikkola, Dhanapati Deka

    Research output: Contribution to journalArticleScientificpeer-review

    150 Citations (Scopus)


    The utilization of oil-cake waste (OCW) derived catalysts in biodiesel production was demonstrated. The sulfonated carbon materials were utilized as catalysts for pretreatment of acid oils (oils containing 8.17–43.73 wt% of free fatty acids). The catalysts could be used to convert free fatty acids (FFA) present in acid oils into corresponding methyl esters within 6–8 h at 80 °C, thus reducing the FFA content to desirable levels below 2 wt%. The esterification activity was found to be dependent on the initial FFA concentration found in the acid oil as well as methanol-to-oil molar ratio. High methanol-to-oil molar ratios and the presence of higher initial FFA concentrations resulted in enhanced esterification rates. Acid oil containing 43.7 wt% FFA was easily converted into mixtures containing up to 71% methyl esters (FAME). The reported catalyst was successfully recycled in five consecutive experiments and exhibited high thermal stability. Most importantly, the catalytic activity of the solid acid was found to outperform homogeneous case when equivalent amount of H2SO4 under similar conditions was applied. Therefore, the OCW derived sulfonated carbon catalyst reported herein could be used as a potential substitute for corrosive, concentrated H2SO4 currently employed for acid oil pretreatment.
    Original languageUndefined/Unknown
    Pages (from-to)167–176
    JournalJournal of Molecular Catalysis A: Chemical
    Issue number388-389
    Publication statusPublished - 2014
    MoE publication typeA1 Journal article-refereed


    • Sulfonated carbon
    • 4-Benzenediazoniumsulfonate
    • Oil-cake waste
    • FFAs
    • biodiesel

    Cite this