Mikael Bergelin

2025

Comparison of self-made and commercial gas targets for [11C]CH4 production

Rajander, J., Solin, O., Helin, S., Slotte, J., Lill, J.-O. & Bergelin, M., 2025, The 19th International Workshop on Targetry and Target Chemistry Proceedings. 1 p.

Research output: Chapter in Book/Conference proceeding › Published conference proceeding › Scientific

2021

Bioimpedance method for monitoring venous ulcers: Clinical proof-of-concept study

Kekonen, A., Bergelin, M., Eriksson, J. E., Vaalasti, A., Ylänen, H., Kielosto, S. & Viik, J., 15 Apr 2021, In: Biosensors and Bioelectronics. 178, 112974.

Research output: Contribution to journal › Article › Scientific › peer-review

Open Access

File

17 Citations (Scopus)

46 Downloads (Pure)

Method and apparatus for detecting corrosion

Lehmusto, J. (Inventor), Bergelin, M. (Inventor) & Lahtiranta, J. (Inventor), 2021

Research output: IPR › Granted patents owned by ÅAU

2019

Bioimpedance Sensor Array for Long-Term Monitoring of Wound Healing from Beneath the Primary Dressings and Controlled Formation of H2O2 Using Low-Intensity Direct Current

Kekonen, A., Bergelin, M., Johansson, M., Joon, N. K., Bobacka, J. & Viik, J., 2019, In: Sensors. 19, 11, p. – 12 p.

Research output: Contribution to journal › Article › Scientific › peer-review

Open Access

File

40 Citations (Scopus)

58 Downloads (Pure)

Initial oxidation mechanisms of stainless steel Sanicro 28 (35Fe27Cr31Ni) exposed to KCl, NaCl, and K2CO3 under dry and humid conditions at 535 °C

Sui, J., Lehmusto, J., Bergelin, M. & Hupa, L., 2019, In: Corrosion Science. 155, p. 29–45

Research output: Contribution to journal › Article › Scientific › peer-review

18 Citations (Scopus)

Production and use of radioactive [82Br]KBr in high-temperature corrosion studies

Lehmusto, J., Bergelin, M. & Lill, J.-O., 2019, In: Corrosion Science. 148, p. 24–30

Research output: Contribution to journal › Article › Scientific › peer-review

2 Citations (Scopus)

2018

Long-term monitoring of acute wound healing from beneath the primary wound dressings

Kekonen, A., Bergelin, M., Eriksson, J.-E., Johansson, M., Vesa, M. & Viik, J., 2018, 2018 16th Biennial Baltic Electronics Conference (BEC). IEEE, p. – 4 p.

Research output: Chapter in Book/Conference proceeding › Published conference proceeding › Scientific › peer-review

5 Citations (Scopus)

The effect of oxygen source on the reaction mechanism of potassium chloride-induced high-temperature corrosion

Lehmusto, J., Bergelin, M., Lindberg, D. & Juhanoja, J., 2018, In: CORROSION. 74, 12, p. 1431–1445

Research output: Contribution to journal › Article › Scientific › peer-review

4 Citations (Scopus)

2017

Applicability of ToF-SIMS and stable oxygen isotopes in KCl-induced corrosion studies at high temperatures

Lehmusto, J., Bergelin, M., Sui, J., Juhanoja, J., Skrifvars, B.-J. & Yrjas, P., 2017, In: Corrosion Science. 125, p. 1–11

Research output: Contribution to journal › Article › Scientific › peer-review

8 Citations (Scopus)

Bioimpedance measurement based evaluation of wound healing

Kekonen, A., Bergelin, M., Eriksson, J.-E., Vaalasti, A., Ylänen, H. & Viik, J., 2017, In: Physiological Measurement. 38, 7, p. 1373–1383

Research output: Contribution to journal › Article › Scientific › peer-review

31 Citations (Scopus)

Detailed high-temperature corrosion investigations under well-defined conditions

Yrjas, P., Lehmusto, J., Bankiewicz, D., Niemi, J., Bergelin, M., Engblom, M., Lindberg, D. & Hupa, L., 2017, Proceedings of the 8th European Combustion Meeting 2017, 18-21 April 2017, Dubrovnik, Croatia. Adria Section of the Combustion Institue (ASCI), p. 391–396

Research output: Chapter in Book/Conference proceeding › Published conference proceeding › Scientific › peer-review

Method for Evaluation of Surgical Wound Healing: A Case Study

Kekonen, A., Bergelin, M., Eriksson, J.-E., Kaartinen, I. & Viik, J., 2017, EMBEC & NBC 2017. Eskola, H., Väisänen, O., Viik, J. & Hyttinen, J. (eds.). Springer, p. 446–449

Research output: Chapter in Book/Conference proceeding › Published conference proceeding › Scientific › peer-review

2 Citations (Scopus)

2016

Bioimpedance measurement system for evaluation of the status of wound healing

Kekonen, A., Bergelin, M., Eriksson, J.-E., Ylänen, H., Kielosto, S. & Viik, J., 2016, Proceedings of the Biennial Baltic Electronics Conference, BEC. N/A (ed.). IEEE, p. 175–178

Research output: Chapter in Book/Conference proceeding › Published conference proceeding › Scientific › peer-review

6 Citations (Scopus)

The effects of KCl, NaCl and K2CO3 on the high-temperature oxidation onset of Sanicro 28 steel

Sui, J., Lehmusto, J., Bergelin, M. & Hupa, M., 2016, In: Oxidation of Metals. 85, 5, p. 565–598

Research output: Contribution to journal › Article › Scientific › peer-review

19 Citations (Scopus)

Utilization of stable oxygen isotopes in high-temperature corrosion studies

Lehmusto, J., Sui, J., Bergelin, M., Skrifvars, B.-J. & Yrjas, P., 2016, Proceedings of the Impacts of fuel quality on power production, the 26th international conference. Hrdlicka, F. (ed.). p. –

Research output: Chapter in Book/Conference proceeding › Published conference proceeding › Professional

2015

A Quantitative Method for Monitoring Wound Healing

Kekonen, A., Bergelin, M., Eriksson, J.-E. & Viik, J., 2015, In: International journal of bioelectromagnetism. 17, 1, p. 36–41

Research output: Contribution to journal › Article › Scientific › peer-review

Comparison of high-temperature oxidation onset behavior of Sanicro 28 steel with KCl, NaCl and K₂CO₃

Sui, J., Lehmusto, J., Bergelin, M. & Hupa, M., 2015, In: Solid State Phenomena. 227, p. 393–396

Research output: Contribution to journal › Article › Scientific › peer-review

Increasing performance and stability of mass-manufacturable biobatteries by ink modification

Tuurala, S., Kallio, T., Smolander, M. & Bergelin, M., 2015, In: Sensing and Bio-Sensing Research. 4, p. 61–69

Research output: Contribution to journal › Article › Scientific › peer-review

2 Citations (Scopus)

Increasing the Operational Lifetime of a Printed Enzymatic Power Source using Superabsorbent Polymers as the Anode Support

Tuurala, S., Kallio, T., Smolander, M. & Bergelin, M., 2015, In: ENERGY TECHNOLOGY. 3, 11, p. 1080–1083 4 p.

Research output: Contribution to journal › Article › Scientific › peer-review

2 Citations (Scopus)

2014

Scale-up of manufacturing of printed enzyme electrodes for enzymatic power source applications

Tuurala, S., Kaukoniemi, O.-V., von Hertzen, L., Uotila, J., Vaari, A., Bergelin, M., Sjöberg-Eerola, P., Eriksson, J.-E. & Smolander, M., 2014, In: Journal of Applied Electrochemistry. 44, 7, p. 881–892

Research output: Contribution to journal › Article › Scientific › peer-review

5 Citations (Scopus)

The Onset of Potassium Chloride Induced High Temperature Corrosion: A Novel Experimental Approach

Sui, J., Lehmusto, J., Bergelin, M. & Hupa, M., 2014, In: Oxidation of Metals. 82, 5-6, p. 437–456 20 p.

Research output: Contribution to journal › Article › Scientific › peer-review

18 Citations (Scopus)

2012

Direct electron transfer of Trametes hirsuta laccase in a dual-layer-architecture of poly(3,4-ethylenedioxythiophene) films

Wang, X., Latonen, R.-M., Sjoberg-Eerola, P., Bobacka, J., Bergelin, M., Boer, H. & Eriksson, J., 2012, In: Abstracts of Papers of the American Chemical Society. 243, p. – 1 p.

Research output: Contribution to journal › Article › Scientific › peer-review

Mediatorless sugar/oxygen enzymatic fuel cells based on gold nanoparticle-modified electrodes

Wang, X., Falk, M., Ortiz, R., Matsumura, H., Bobacka, J., Ludwig, R., Bergelin, M., Gorton, L. & Shleev, S., 2012, In: Biosensors and Bioelectronics. 33, 1, p. 219–225

Research output: Contribution to journal › Article › Scientific › peer-review

168 Citations (Scopus)

Poly(3,4-ethylenedioxythiophene) based enzyme-electrode configuration for enhanced direct electron transfer type biocatalysis of oxygen reduction

Latonen, R.-M., Wang, X., Sjöberg-Eerola, P., Eriksson, J.-E., Bergelin, M. & Bobacka, J., 2012, In: Electrochimica Acta. 68, p. 25–31

Research output: Contribution to journal › Article › Scientific › peer-review

16 Citations (Scopus)

Printed supercapacitors on paperboard substrate

Keskinen, J., Sivonen, E., Jussila, S., Bergelin, M., Johansson, M. & Vaari Maria Smolander, A., 2012, In: Electrochimica Acta. 85, p. 302–306

Research output: Contribution to journal › Article › Scientific › peer-review

37 Citations (Scopus)

2011

Direct Electron Transfer of Trametes hirsuta Laccase in a Dual-Layer Architecture of Poly(3,4-ethylenedioxythiophene) Films

Wang, X., Latonen, R.-M., Sjöberg-Eerola, P., Eriksson, J.-E., Bobacka, J., Boer, H. & Bergelin, M., 2011, In: Journal of Physical Chemistry C. 115, 13, p. 5919–5929

Research output: Contribution to journal › Article › Scientific › peer-review

23 Citations (Scopus)

Immobilization of Trametes hirsuta laccase into poly(3,4-ethylenedioxythiophene) and polyaniline polymer-matrices

Wang, X., Sjöberg-Eerola, P., Immonen, K., Bobacka, J. & Bergelin, M., 2011, In: Journal of Power Sources. 196, 11, p. 4957–4964

Research output: Contribution to journal › Article › Scientific › peer-review

25 Citations (Scopus)

2010

Printed supercapacitor as hybrid device with an enzymatic power source

Jari, K., Eino, S., Bergelin, M., Eriksson, J.-E., Sjöberg-Eerola, P., Matti, V., Maria, S., Anu, V., Johanna, U., Harry, B. & Saara, T., 2010, Advances in Science and Technology. Publications Ltd., T. T. (ed.). p. 331–336

Research output: Chapter in Book/Conference proceeding › Published conference proceeding › Scientific › peer-review

The effect of counter ions and substrate material on the growth and morphology of poly(3,4-ethylenedioxythiophene) films: Towards the application of enzyme electrode construction in biofuel cells

Wang, X., Sjöberg-Eerola, P., Eriksson, J.-E., Bobacka, J. & Bergelin, M., 2010, In: Synthetic Metals. 160, 13-14, p. 1373–1381

Research output: Contribution to journal › Article › Scientific › peer-review

35 Citations (Scopus)

2008

Development of a printable laccase-based biocathode for fuel cell applications

Maria, S., Harry, B., Matti, V., Robert, R., Bergelin, M., Eriksson, J.-E., Xia-Chang, Z., Anu, K. & Liisa, V., 2008, In: Enzyme and Microbial Technology. 43, 2, p. 93–102

Research output: Contribution to journal › Article › Scientific › peer-review

79 Citations (Scopus)

2006

Nanostructured precious metal catalysts for PEM fuel cells and hydrogen generators

Pertti, K., Eini, P., Bergelin, M., Jari, K., Unto, T., Eriksson, J.-E., Matti, V., Terttu, P., Rolf, R., Matti, R. & Robert, R., 2006, Applied Material Research at VTT. Teknillinen Tutkimuskeskus, V. (ed.). VTT, p. 30–39

Research output: Chapter in Book/Conference proceeding › Chapter › Scientific

2005

Comparison of modeling and experimental results of modified Pt-based PEMFC cathode-catalysts

Eini, P., Ulla, K., Bergelin, M., Jari, K., Heikki, K., Terttu, P. & Matti, V., 2005, Proton Conducting Membrane Fuel Cells III : proceedings of the International Symposium. Murthy, Fuller, Zee, V. & Gottesfeld (eds.). The Electrochemical Society, p. 74–88

Research output: Chapter in Book/Conference proceeding › Published conference proceeding › Scientific › peer-review

2003

Characterization of Pt-based catalyst materials by voltammetric techniques

Koponen, U., Kumpulainen, H., Bergelin, M., Keskinen, J., Peltonen, T., Valkiainen, M. & Wasberg, M., 2003, In: Journal of Power Sources. 118, 1-2, p. 325–333

Research output: Contribution to journal › Article › Scientific › peer-review

33 Citations (Scopus)

2002

Electrodeposition of submonolayer amounts of Os onto polycrystalline Pt

Ulla, K., Bergelin, M. & Wasberg, M., 2002, In: Journal of Electroanalytical Chemistry. 531, 1, p. 87–94

Research output: Contribution to journal › Article › Scientific › peer-review

4 Citations (Scopus)

In situ voltammetric characterization of PEM fuel cell catalyst layers

Heikki, K., Terttu, P., Ulla, K., Bergelin, M., Matti, V. & Mikael, W., 2002, VTT Tiedotteita. Processes, V. (ed.). Valtion teknillinen tutkimuskeskus (VTT), p. 1–28

Research output: Chapter in Book/Conference proceeding › Chapter › Scientific

4 Citations (Scopus)

2000

The impinging jet flow cell - a novel method for the study of PEM fuel cell material

Koponen, U., Peltonen, T., Bergelin, M., Mennola, T., Valkiainen, M., Kaskimies, J. & Wasberg, M., 2000, In: Journal of Power Sources. 86, 1-2, p. 261–268

Research output: Contribution to journal › Article › Scientific › peer-review

20 Citations (Scopus)

1999