Optimal design and operation of a steel plant integrated with a polygeneration system

A1 Originalartikel i en vetenskaplig tidskrift (referentgranskad)

Interna författare/redaktörer

Publikationens författare: Hamid Ghanbari, Henrik Saxén, Ignacio E. Grossmann
Publiceringsår: 2013
Tidskrift: AIChE Journal
Tidskriftsakronym: AIChE J.
Volym: 59
Nummer: 10
Artikelns första sida, sidnummer: 3659
Artikelns sista sida, sidnummer: 3670
ISSN: 1547-5905
eISSN: 1547-5905


A process integration approach has been applied to integrate a traditional steelmaking plant with a polygeneration system to increase energy efficiency and suppress carbon dioxide emissions from the system. Using short-cut models and empirical equations for different units and available technologies for gas separation, methane gasification, and methanol synthesis, a mixed integer nonlinear model is applied to find the optimal design of the polygeneration plant and operational conditions of the system. Due to the complexity of the blast furnace (BF) operation, a surrogate model technique is chosen based on an existing BF model. The results show that from an economic perspective, the pressure swing adsorption process with gas-phase methanol unit is preferred. The results demonstrate that integration of conventional steelmaking with a polygeneration system could decrease the specific emissions by more than 20 percent.


carbon dioxide emission, generalized disjunctive programming, polygeneration system, process integration, steelmaking

Senast uppdaterad 2020-15-08 vid 03:27