Detection of gaseous species during KCl‐induced high‐temperature corrosion by the means of CPFAAS and CI‐APi‐TOF

A1 Originalartikel i en vetenskaplig tidskrift (referentgranskad)

Interna författare/redaktörer

Publikationens författare: Juho Lehmusto, Miska Olin, Jan Viljanen, Joni Kalliokoski, Fanni Mylläri, Juha Toivonen, Miikka Dal Maso, Leena Hupa
Publiceringsår: 2020
Tidskrift: Materials and Corrosion / Werkstoffe und Korrosion
Volym: 71
Nummer: 2
Artikelns första sida, sidnummer: 222
Artikelns sista sida, sidnummer: 231


Two different analytical approaches - collinear photofragmentation and atomic absorption spectroscopy (CPFAAS) and chemical ionization atmospheric pressure interface time-of-flight mass spectrometer (CI-APi-TOF) were applied to detect and identify online gaseous KOH and HCl formed in the addressed high-temperature reactions. Samples of pure KCl, KCl+Cr, KCl+Fe, and KCl+316L were studied at 550 °C under dry and humid conditions with varying oxygen concentrations. The goal was to shed more light on the gas-phase chemistry during KCl-induced corrosion under conditions relevant to biomass combustion. CI-APi-TOF proved to be a valuable tool for high-temperature corrosion studies: HCl was identified to have formed during the reactions under humid conditions. On the contrary, despite the known sensitivity of CPFAAS, the formation of KOH could not be verified in any of the performed measurements.


CI-APi-TOF, CPFAAS, gaseous KCl, HCl formation, High-temperature corrosion

Senast uppdaterad 2020-07-04 vid 08:16