Switchable aqueous pentaethylenehexamine system for CO2 capture: An alternative technology with industrial potential

A1 Originalartikel i en vetenskaplig tidskrift (referentgranskad)


Interna författare/redaktörer


Publikationens författare: Thai Q. Bui, Santosh G. Khokarale, Shashi K. Shukla, Jyri-Pekka Mikkola
Publiceringsår: 2018
Tidskrift: ACS Sustainable Chemistry and Engineering
Tidskriftsakronym: ACS Sustainable Chem. Eng.
Volym: 6
Nummer: 8
Artikelns första sida, sidnummer: 10395
Artikelns sista sida, sidnummer: 10407
eISSN: 2168-0485


Abstrakt

Herein we report the application of polyamine pentaethylenehexamine (PEHA, 3,6,9,12-tetraazatetradecane-1,14-diamine) in CO2 absorption with both neat PEHA and aqueous solutions thereof. The absorption of molecular CO2 in pure PEHA and in PEHA-water systems resulted in the formation of two chemical species, namely, PEHA carbamate and bicarbonate. It was observed that, upon formation of these species, both the CO2 absorption capacity and CO2 absorption rate were controlled by the amount of water in the system. During the CO2 absorption, the neat PEHA and 92 wt % PEHA were capable of forming carbamate species only while other aqueous analogues with higher dilution allowed for the formation of both carbamate and bicarbonate species upon exceeding 8 wt % water in the mixture. The CO2 uptake steadily increased with an increase in the water concentration in the solvent mixture and reached the maximum value of 0.25 g of CO2/(g of solvent) in the case of 56 wt % PEHA in water. However, in the case of more dilute systems (i.e., <56 wt % PEHA in water), the trend reversed and the CO2 loading decreased linearly to 0.05 g of CO2/(g of solvent) for 11 wt % PEHA in water. Meanwhile, it usually took shorter time to achieve the full CO2 absorption capacity (equilibrium) with increasing water content in all cases. The 13C NMR analysis was used to quantify the relative amount of PEHA carbamate and bicarbonate, respectively, in reaction mixtures. The Kamlet–Taft parameters (α, β, and π*) of aqueous solutions for different concentrations of PEHA were also studied taking advantage of various solvatochromic dyes and correlated with the CO2 absorption capacity. The thermally induced switchable nature of CO2-saturated neat and aqueous PEHA solutions for transformation of ionic PEHA carbamate and bicarbonate moieties to molecular PEHA is also represented. A comparison between aqueous PEHA and aqueous monoethanolamine (industrial solvent) for CO2 capture is reported. Hence, most importantly, a switchable PEHA system is demonstrated for reversible CO2 absorption processes.


Senast uppdaterad 2020-20-01 vid 03:41