Monitoring of dissolved air flotation by focused beam reflectance measurement

A1 Journal article (refereed)


Internal Authors/Editors


Publication Details

List of Authors: Saarimaa V, Sundberg A, Holmbom B, Blanco A, Fuente E, Negro C
Publisher: AMER CHEMICAL SOC
Publication year: 2006
Journal: Industrial & Engineering Chemistry Research
Journal acronym: IND ENG CHEM RES
Volume number: 45
Issue number: 21
Start page: 7256
End page: 7263
Number of pages: 8
ISSN: 0888-5885


Abstract

Aggregation and removal of detrimental substances from peroxide-bleached, fiber-free thermomechanical pulp water by dissolved air flotation (DAF) were studied for different chemicals. A focused beam reflectance measurement (FBRM) instrument was used to continuously assess the aggregation and removal of dissolved and colloidal substances (DCS) during batchwise DAF of process water. FBRM is particularly suitable for assessing the aggregation of DCS during the coagulation process prior to flotation. Differences between flocculants, as well as between different flocculant doses, can be observed. The FBRM results were in good agreement with turbidity measurements and with determination of wood resin and pectic acids by gas chromatography. General trends in the flotation process were also observed. However, monitoring the aggregates during flotation is more complicated due to the interference of air bubbles. To determine the overall flotation efficiency, a two-probe system with measurement points before and after actual flotation is proposed. It is essential to ensure good agitation at the measurement points, and if the destabilization of DCS produces sticky flocs, as in the case of cationic polyacrylamide, the position and the cleaning of the FBRM probe in the process pipe must be optimized to minimize the deposition of sticky material on the probe.


Keywords

Dissolved air flotation (DAF)

Last updated on 2019-16-12 at 04:04