Hydroconversion of paraffinic wax over platinum and palladium catalysts supported on silica–alumina

A1 Originalartikel i en vetenskaplig tidskrift (referentgranskad)


Interna författare/redaktörer


Publikationens författare: Rodrigo Suárez París, Mario Enrico L’Abbate, Leonarda Francesca Liotta, Vicente Montes, Javier Barrientos, Francesco Regali, Atte Aho, Magali Boutonnet, Sven Järås
Publiceringsår: 2016
Tidskrift: Catalysis Today
Volym: 275
Artikelns första sida, sidnummer: 141
Artikelns sista sida, sidnummer: 148
eISSN: 1873-4308


Abstrakt

Two bifunctional catalysts consisting of platinum or palladium supported on amorphous silica–alumina were prepared and tested in hydrocracking/hydroisomerization of paraffinic wax. The performance of both noble metals was studied at the following reaction conditions: P = 35 bar; T = 300–330 °C; H2/wax = 0.1 wt/wt; WHSV = 1–4 h−1. The platinum sample was more active in hydrocracking of C22+ compounds and more selective to middle distillates. On the other hand, the palladium-based catalyst resulted in a higher isomerization degree of the products and lower amounts of methane and ethane. The higher production of light compounds over platinum is attributed to a monofunctional hydrogenolysis mechanism, in addition to the classical bifunctional route. Characterization studies showed that both catalysts had comparable metal and acid site distributions. These observations would indicate that the different catalyst performance is due to the different nature of platinum and palladium as hydrogenation/dehydrogenation function.


Nyckelord

engineering education

Senast uppdaterad 2019-21-07 vid 05:41