CO2 sequestration with serpentinite and metaperidotite from Northeast Portugal

A1 Originalartikel i en vetenskaplig tidskrift (referentgranskad)


Interna författare/redaktörer


Publikationens författare: Inês S. Romão, Licinio M. Gando-Ferreira, M. Manuela V.G. da Silva, Ron Zevenhoven
Förläggare: Elsevier
Publiceringsår: 2016
Tidskrift: Minerals Engineering
Volym: 94
Artikelns första sida, sidnummer: 104
Artikelns sista sida, sidnummer: 114
eISSN: 1872-9444


Abstrakt

The application of a staged process for CO2 sequestration by mineralisation, studied at Åbo Akademi University (ÅA), to abundant minerals from Northeast Portugal, is presented. Mg is extracted from magnesium silicates using recoverable ammonium salts (ammonium sulphate – AS and ammonium bisulphate – ABS), precipitated in the form of Mg(OH)2 and subsequently carbonated at 20 bar CO2 partial pressure. The concept of the process is promising since the Mg extraction requires heat at ∼450 °C while the Mg(OH)2 carbonation produces heat at ∼500 °C. Samples of serpentinite and metaperidotite were collected from Bragança and their theoretical capacity for CO2 mineralisation, in Northeast Portugal, was estimated to be 3.4 Gt of CO2. All the samples were mineralogically and physically characterized using X-ray diffraction and ICP-OES techniques and microscopic observation of thin sections. The reactivity of the samples, for Mg(OH)2 production, was tested at different temperatures (350–500 °C) with AS and ABS, in different mixing conditions and both in the presence and absence of water. Metaperidotite was shown to be more reactive than serpentinite. The produced Mg(OH)2 was carbonated in a pressurized fluidized bed at ÅA. The maximum Mg extraction (using ABS) and Mg(OH)2 carbonation levels reached were 80% and 70%, respectively.


Nyckelord

CCS, CO2 sequestration, mineral carbonation, portugal

Senast uppdaterad 2020-17-01 vid 03:44