The influence of catalyst amount and Pd loading on the H₂O₂ synthesis from hydrogen and oxygen

A1 Journal article (refereed)


Internal Authors/Editors


Publication Details

List of Authors: Nicola Gemo, Stefano Sterchele, Pierdomenico Biasi, Paolo Centomo, Paolo Canu, Marco Zecca, Andrey Shchukarev, Krisztián Kordás, Tapio Olavi Salmi, Jyri-Pekka Mikkola
Publication year: 2015
Journal: Catalysis Science and Technology
Journal acronym: Catal. Sci. Technol.
Volume number: 5
Start page: 3545
End page: 3555
eISSN: 2044-4761


Abstract

Palladium catalysts with an active metal content from 0.3 to 5.0 wt.% and supported on a strongly acidic, macroporous resin were prepared by ion-exchange/reduction method. H2O2 direct synthesis was carried out in the absence of promoters (acids and halides). The total Pd amount in the reacting environment was varied by changing A) the catalyst concentration in the slurry and B) the Pd content of the catalyst. In both cases, smaller amounts of the active metal enhance the selectivity towards H2O2, at any H2 conversion, with option B) better than A). In case A), the Pd(II)/Pd(0) molar ratio (XPS) in the spent catalysts was found to decrease at lower catalyst Pd content. With these catalysts and this experimental set-up the dynamic HL2/Pd molar ratio, the metal loading and the metal particle size were the key factors controlling the selectivity, which reached 57% at 60% H2 conversion, and 80% at lower conversion.

Last updated on 2019-20-11 at 04:57