Professor

Martti Toivakka

Email: martti.toivakka@abo.fi
Mobile: +358-405040689
Phone: +358-2-2154852


Peer-reviewed publications

A1 Journal article (refereed)
Characterization of flame coated nanoparticle surfaces with antibacterial properties and the heat-induced embedding in thermoplastic-coated paper (2019)
Kofi J. Brobbey, Janne Haapanen, Jyrki M. Mäkelä, Marianne Gunell, Erkki Eerola, Emil Rosqvist, Jouko Peltonen, Jarkko J. Saarinen, Martti Toivakka
SN Applied Science
View on publisher's site
A1 Journal article (refereed)
Continuous Processing of Nanocellulose and Polylactic Acid into Multilayer Barrier Coatings (2019)
Rajesh Koppolu, Johanna Lahti, Tiffany Abitbol, Agne Swerin, Jurkka Kuusipalo, Martti Toivakka
ACS Applied Materials and Interfaces
View on publisher's site
A1 Journal article (refereed)
Effect of plasma coating on antibacterial activity of silver nanoparticles (2019)
Kofi J. Brobbey, Janne Haapanen, Jyrki M. Mäkelä, Marianne Gunell, Erkki Eerola, Emil Rosqvist, Jouko Peltonen, Jarkko J. Saarinen, Mikko Tuominen, Martti Toivakka
Thin Solid Films
View on publisher's site
A1 Journal article (refereed)
Continuous roll-to-roll coating of cellulose nanocrystals onto paperboard (2018)
Rajesh Koppolu, Tiffany Abitbol, Vinay Kumar, Aayush Kumar Jaiswal, Agne Swerin, Martti Toivakka
Cellulose
View on publisher's site
A1 Journal article (refereed)
Controlled time release and leaching of silver nanoparticles using a thin immobilizing layer of aluminum oxide (2018)
Kofi J.Brobbey, Janne Haapanen, Marianne Gunell, Martti Toivakka, Jyrki M. Mäkelä, Erkki Eerola, Rizwan Ali, Muhammad R. Saleem, Seppo Honkanen, Johan Bobacka, Jarkko J. Saarinen
Thin Solid Films
View on publisher's site
A4 Conference proceedings
Dynamics of capillary-driven flow in paper-based microfluidic devices (2018)
Joel Songok, Martti Toivakka
TAPPI Press
A4 Conference proceedings
High-speed manufacturing of antimicrobial paper (2018)
K. J. Brobbey, J. Haapanen, M. Gunell, J. M. Mäkelä, E. Eerola, J. J. Saarinen, M. Toivakka
TAPPI Press
A1 Journal article (refereed)
Mechanical properties of TEMPO-oxidised bacterial cellulose-amino acid biomaterials (2018)
Mahdi Pahlevan, Martti Toivakka, Parvez Alam
European Polymer Journal
View on publisher's site
A1 Journal article (refereed)
Slot die coating of nanocellulose on paperboard (2018)
Vinay Kumar, Douglas W. Bousfield, Martti Toivakka
Tappi Journal
A1 Journal article (refereed)
Stiffness and swelling characteristics of nanocellulose films in cell culture media (2018)
Ruut Kummala, Wenyang Xu, Chunlin Xu, Martti Toivakka
Cellulose
View on publisher's site
A1 Journal article (refereed)
The influence of mineral particles on fibroblast behaviour: A comparative study (2018)
Diosangeles Soto Veliz, Jens C Luoto, Ilari Pulli, Martti Toivakka
Colloids and Surfaces B: Biointerfaces
View on publisher's site
A1 Journal article (refereed)
Antimicrobial characterization of silver nanoparticle-coated surfaces by “touch test” method (2017)
Marianne Gunell, Janne Haapanen, Kofi J Brobbey, Jarkko J Saarinen, Martti Toivakka, Jyrki M Mäkelä, Pentti Huovinen, Erkki Eerola
Nanotechnology, Science and Applications
View on publisher's site
A1 Journal article (refereed)
Coatability of cellulose nanofibril suspensions: role of rheology and water retention (2017)
Vinay Kumar, Vegar Ottesen, Kristin Syverud, Øyvind Weiby Gregersen, Martti Toivakka
BioResources
View on publisher's site
A4 Conference proceedings
Conductive carbon-nanocellulose coatings on paper (2017)
V. Kumar, S. Forsberg, A.-C. Engstrom, M. Nurmi, C. Dahlstrom, M. Toivakka
TAPPI Press
A1 Journal article (refereed)
Conductive nanographite–nanocellulose coatings on paper (2017)
Vinay Kumar, Sven Forsberg, Ann-Christine Engström, Maristiina Nurmi, Britta Andres, Christina Dahlström, Martti Toivakka
Flexible and Printed Electronics
View on publisher's site
A1 Journal article (refereed)
Efficacy of natural plant extracts in antimicrobial packaging systems (2017)
Kofi J. Brobbey, Jarkko J. Saarinen, Hanna-leena Alakomi, Baoru Yang, Martti Toivakka
Journal of Applied Packaging Research
A1 Journal article (refereed)
Modelling of capillary-driven flow for closed paper-based microfluidic channels (2017)
Joel Songok, Martti Toivakka
Journal of Micromechanics and Microengineering
View on publisher's site
A1 Journal article (refereed)
One-step flame synthesis of silver nanoparticles for roll-to-roll production of antibacterial paper (2017)
Kofi J. Brobbey, Janne Haapanen, Marianne Gunell, Jyrki M.Mäkelä, Erkki Eerola, Martti Toivakka, Jarkko J.Saarinen
Applied Surface Science
View on publisher's site
A3 Book section, Chapters in research books
Paper electronics (2017)
Martti Toivakka, Jouko Peltonen, Ronald Österbacka
Wiley-VCH Verlag
View on publisher's site
A1 Journal article (refereed)
Pigment impacts on strength in a paper coating & movement of binder during coating colour consolidation (2017)
Janet Preston, Martti Toivakka, Andrew Findlay, Rui Sergio Tsukuda, Evandro Oliveira, Edenil Costa
Papel
A4 Conference proceedings
Slot coating of nanocellulose on paperboard (2017)
V. Kumar, D. Bousfield, M. Toivakka
TAPPI Press
A1 Journal article (refereed)
Substrate role in coating of microfibrillated cellulose suspensions (2017)
Vinay Kumar, Venkata Rajesh Koppolu, Douglas Bousfield, Martti Toivakka
Cellulose
View on publisher's site
A4 Conference proceedings
The effect of latex characteristics and addition level on the properties of cellulose nanofiber films (2017)
V. Kumar, E. Lazarus, P. Salminen, D. Bousfield, M. Toivakka
TAPPI Press
A1 Journal article (refereed)
Viability and properties of roll-to-roll coating of cellulose nanofibrils on recycled paperboard (2017)
Vegar Ottesen, Vinay Kumar, Martti Toivakka, Gary Chinga-Carrasco, Kristin Syverud, Øyvind Weiby Gregersen
Nordic Pulp and Paper Research Journal
View on publisher's site
A1 Journal article (refereed)
A Stokesian dynamics approach for simulation of magnetic particle suspensions (2016)
Anders Sand, Jan F. Stener, Martti O. Toivakka, Johan E. Carlson, Bertil I. Pålsson
Minerals Engineering
View on publisher's site
A1 Journal article (refereed)
Controlling capillary-driven surface flow on a paper-based microfluidic channel (2016)
Joel Songok, Martti Toivakka
Microfluidics and Nanofluidics
View on publisher's site
A1 Journal article (refereed)
Enhancing capillary-driven flow for paper-based microfluidic channels (2016)
Joel Songok, Martti Toivakka
ACS Applied Materials and Interfaces
View on publisher's site
A1 Journal article (refereed)
Heat and mass transfer models to understand the drying mechanisms of a porous substrate (2016)
Joel Songok, Douglas W. Bousfield, Patrick A.C. Gane, Martti Toivakka
European Physical Journal E
View on publisher's site
A1 Journal article (refereed)
Influence of nanolatex addition on cellulose nanofiber film properties (2016)
Vinay Kumar, Etienne Lazarus, Pekka Salminen, Douglas Bousfield, Martti Toivakka
Nordic Pulp and Paper Research Journal
View on publisher's site
A4 Conference proceedings
Nanocellulose coatability on paper in a roll-to-roll process (2016)
Vinay Kumar, Axel Elfving, Hanna Koivula, Douglas W Bousfield, Martti Toivakka
TAPPI Press
A1 Journal article (refereed)
Planar fluidic channels on TiO2 nanoparticle coated paperboard (2016)
Dimitar Valtakari, Milena Stepien, Janne Haapanen, Hannu Teisala, Mikko Tuominen, Jurkka Kuusipalo, Jyrki M. Mäkelä, Martti Toivakka, Jarkko J. Saarinen
Nordic Pulp and Paper Research Journal
View on publisher's site
A1 Journal article (refereed)
Rheology of cellulose nanofibers suspensions: boundary driven flow (2016)
Behzad Nazari, Vinay Kumar, Douglas W. Bousfield, Martti Toivakka
Journal of Rheology
View on publisher's site
A1 Journal article (refereed)
Rheology of microfibrillated cellulose suspensions in pressure-driven flow (2016)
Vinay Kumar, Behzad Nazari, Douglas Bousfield, Martti Toivakka
Applied Rheology
View on publisher's site
A4 Conference proceedings
Roll-to-roll application of photocatalytic TiO2 nanoparticles for printed functionality (2016)
J. J. Saarinen, D. Valtakari, R. Bollström, M. Stepien, J. Haapanen, J. M. Mäkelä, M. Toivakka
TechConnect
A1 Journal article (refereed)
Roll-to-roll processed cellulose nanofiber coatings (2016)
Vinay Kumar, Axel Elfving, Hanna Koivula, Douglas Bousfield, Martti Toivakka
Industrial & Engineering Chemistry Research
View on publisher's site
A4 Conference proceedings
TiO2 nanostructures for dye-sensitized solar cells (DSSCs) on a glass substrate (2016)
Jarkko J. Saarinen, Roger Bollström, Björn Törngren, Janne Haapanen, Tommi Kääriäinen, Steven M. George, Jyrki M. Mäkelä, Martti Toivakka
Advances in Printing and Media Technology
iarigai - The International Association of Research Organizations for the Information, Media and Graphic Arts Industries
A4 Conference proceedings
A Stokesian dynamics approach for simulation of magnetic particle suspensions (2015)
A. Sand, J.F. Stener, J.E. Carlson, B.I. Pålsson, M.O. Toivakka
Minerals Engineering International
Minerals Engineering International
A1 Journal article (refereed)
Binary TiO₂/SiO₂ nanoparticle coating for controlling the wetting properties of paperboard (2015)
J. Haapanen, M. Aromaa, H. Teisala, M. Tuominen, M. Stepien, J.J. Saarinen, M. Heikkilä, M. Toivakka, J. Kuusipalo, J.M. Mäkelä
Materials Chemistry and Physics
View on publisher's site
A1 Journal article (refereed)
Conductivity of PEDOT:PSS on spin-coated and drop cast nanofibrillar cellulose thin films (2015)
Dimitar Valtakari, Jun Liu, Vinay Kumar, Chunlin Xu, Martti Toivakka, Jarkko J. Saarinen
Nanoscale Research Letters
View on publisher's site
A4 Conference proceedings
Effect of coating structure and cationic charge level on inkjet printability (2015)
Frank Gref, Päivi Miettinen, Jaana Heinonen, Mika Sundquist, Martti Toivakka
iarigai - The International Association of Research Organizations for the Information, Media and Graphic Arts Industries
A4 Conference proceedings
Fully printed biodegradable nanocellulose-based humidity sensor for SMART LABEL applications (2015)
Tomáš Syrový, Vinay Kumar, Martti Toivakka, Chunlin Xu, Lucie Syrová, Jan Řeboun, Douglas W. Bousfield
iarigai - The International Association of Research Organizations for the Information, Media and Graphic Arts Industries
A1 Journal article (refereed)
Influence of anionic and cationic polyelectrolytes on the conductivity and morphology of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) films (2015)
Dimitar Valtakari, Roger Bollström, Martti Toivakka, Jarkko J. Saarinen
Thin Solid Films
View on publisher's site
A1 Journal article (refereed)
L-Lysine templated CaCO₃ precipitated to flax develops flowery crystal structures that improve the mechanical properties of natural fibre reinforced composites (2015)
Parvez Alam, Pi Fagerlund, Piotr Hägerstrand, Jim Töyrylä, Shahrouz Amini, Maryam Tadayon, Ali Miserez, Vinay Kumar, Mahdi Pahlevan, Martti Toivakka
Composites Part A: Applied Science and Manufacturing
View on publisher's site
A4 Conference proceedings
Microfibrillated cellulose suspensions in slot flow (2015)
V. Kumar, D. Bousfield, M. Toivakka
Annual Transactions- Nordic Rheology Society
Nordic Rheology Society
A1 Journal article (refereed)
Properties of adsorbents used for bleaching of vegetable oils and animal fats (2015)
Vilppu Kuuluvainen, Päivi Mäki-Arvela, Anne-Riikka Rautio, Krisztian Kordas, Jorma Roine, Atte Aho, Blanka Toukoniitty, Heidi Österholm, Martti Toivakka, Dmitry Yu Murzin
Journal of Chemical Technology and Biotechnology
View on publisher's site
A1 Journal article (refereed)
Protein and bacterial interactions with nanostructured polymer coatings (2015)
Helka Juvonen, Terhi Oja, Anni Määttänen, Jawad Sarfraz, Emil Rosqvist, Tiina A. Riihimäki, Martti Toivakka, Markku Kulomaa, Pia Vuorela, Adyary Fallarero, Jouko Peltonen, Petri Ihalainen
Colloids and Surfaces B: Biointerfaces
View on publisher's site
A4 Conference proceedings
Roll-to-roll coating by liquid flame spray nanoparticle deposition (2015)
Jyrki M. Mäkelä, Janne Haapanen, Mikko Aromaa, Hannu Teisala, Mikko Tuominen, Milena Stepien, Jarkko J. Saarinen, Martti Toivakka, Jurkka Kuusipalo
Materials Research Society
View on publisher's site
A1 Journal article (refereed)
Transparent nanocellulose-pigment composite films (2015)
Camila Honorato, Vinay Kumar, Jun Liu, Hanna Koivula, Chunlin Xu, Martti Toivakka
Journal of Materials Science
View on publisher's site
A1 Journal article (refereed)
Understanding coating strength at the molecular and microscopic level (2015)
Martti Toivakka, Parvez Alam, Farid Touaiti, Anniina Oravilahti, Tuomas Oravilahti, Juha Knuutinen, Robert Nilsson, Mahdi Pahlevan, Mia Ahokas, Carl-Eric Wilen
Tappi Journal
A4 Conference proceedings
Abrasion and Compression Resistance of Liquid-Flame-Spray-Deposited Functional Nanoparticle Coatings on Paper (2014)
Milena Stepien, Gary Chinga-Carrasco, Jarkko J. Saarinen, Hannu Teisala, Mikko Tuominen, Janne Haapanen, Jurkka Kuusipalo, Jyrki M. Mäkelä, Martti Toivakka
TAPPI Press
A1 Journal article (refereed)
Adjustable wetting of Liquid Flame Spray (LFS) TiO2-nanoparticle coated board: Batch-type versus roll-to-roll stimulation methods (2014)
Mikko Tuominen, Hannu Teisala, Janne Haapanen, Mikko Aromaa, Jyrki M. Mäkelä, Milena Stepien, Jarkko J. Saarinen, Martti Toivakka, Jurkka Kuusipalo
Nordic Pulp and Paper Research Journal
View on publisher's site
A1 Journal article (refereed)
Comparison of nano- and microfibrillated cellulose films (2014)
Kumar V, Bollström R, Yang A, Chen QX, Chen G, Salminen P, Bousfield D, Toivakka M
Cellulose
View on publisher's site
A1 Journal article (refereed)
Creation of superhydrophilic surfaces of paper and board (2014)
Tuominen M, Teisala H, Aromaa M, Stepien M, Mäkelä JM, Saarinen JJ, Toivakka M, Kuusipalo J
Journal of Adhesion Science and Technology
View on publisher's site
A4 Conference proceedings
Effect of polyelectrolytes on conductivity for printed functionality (2014)
Dimitar Valtakari, Roger Bollström, Martti Toivakka, Jarkko J. Saarinen
The International Association of Research Organisanisations for the Information, Media and Graphics Arts Industry
A1 Journal article (refereed)
Electrostatic charges instigate 'concertina-like' mechanisms of molecular toughening in MaSp1 (spider silk) proteins (2014)
Mahdi Pahlevan, Martti Toivakka, Parvez Alam
Materials Science and Engineering: C
View on publisher's site
A4 Conference proceedings
Fabrication of Paper Based Microfluidics Channels by UV Irradiation (2014)
Joel Songok, Martti Toivakka
TAPPI Press
A4 Conference proceedings
Mechanical Properties of Pigmented Coating Composites Containing Starch (2014)
Zhengjun Zhu, Pekka Salminen, Martti Toivakka
TAPPI Press
A4 Conference proceedings
Molecular and Microscopic Level Understanding of Coating Strength (2014)
Martti Toivakka, Parvez Alam, Farid Touaiti, Anniina Oravilahti, Tuomas Oravilahti, Juha Knuutinen, Robert Nilsson, Mahdi Pahlevan, Mia Ahokas, Carl-Eric Wilen
TAPPI Press
A1 Journal article (refereed)
On the non-linear attachment characteristics of blood to bacterial cellulose/kaolin biomaterials (2014)
Diosángeles Soto Véliz, Catharina Alam, Diana M. Toivola, Martti Toivakka, Parvez Alam
Colloids and Surfaces B: Biointerfaces
View on publisher's site
A1 Journal article (refereed)
Paper-Based Microfluidics: Fabrication Technique and Dynamics of Capillary-Driven Surface Flow (2014)
Joel Songok, Mikko Tuominen, Hannu Teisala, Janne Haapanen, Jyrki Mäkelä, Jurkka Kuusipalo, Martti Toivakka.
ACS Applied Materials and Interfaces
View on publisher's site
A2 Review article, Literature review, Systematic review
Review on Liquid Flame Spray in paper converting: Multifunctional superhydrophobic nanoparticle coatings (2014)
Hannu Teisala, Mikko Tuominen, Janne Haapanen, Mikko Aromaa, Milena Stepien, Jyrki M. Mäkelä, Jarkko J. Saarinen, Martti Toivakka, Jurkka Kuusipalo
Nordic Pulp and Paper Research Journal
View on publisher's site
A1 Journal article (refereed)
Structure and mechanical properties of starch/ styrene-butadiene latex composites (2014)
Chen G, Zhu Z, Salminen P, Toivakka M
Advanced Materials Research
View on publisher's site
A1 Journal article (refereed)
Switchable water absorption of paper via liquid flame spray nanoparticle coating (2014)
Hannu Teisala, Mikko Tuominen, Janne Haapanen, Mikko Aromaa, Milena Stepien, Jyrki M. Mäkelä, Jarkko J. Saarinen, Martti Toivakka, Jurkka Kuusipalo
Cellulose
View on publisher's site
A1 Journal article (refereed)
Temperature effects on dynamic water absorption into paper (2014)
Joel Songok, Pekka Salminen, Martti Toivakka
Journal of Colloid and Interface Science
View on publisher's site
A1 Journal article (refereed)
Barrier properties created by dispersion coating (2013)
Bollstrom R, Nyqvist R, Preston J, Salminen P, Toivakka M
Tappi Journal
A1 Journal article (refereed)
Changes in solid particle fractions of coating color in low- and high-speed blade coating (2013)
Rutanen A, Toivakka M
Tappi Journal
A1 Journal article (refereed)
Compressibility of porous TiO₂ nanoparticle coating on paperboard (2013)
Milena Stepien, Jarkko J Saarinen, Hannu Teisala, Mikko Tuominen, Janne Haapanen, Jyrki M Mäkelä, Jurkka Kuusipalo, Martti Toivakka
Nanoscale Research Letters
View on publisher's site
A1 Journal article (refereed)
Crispatotrochus-mimicking coatings improve the flexural properties of organic fibres (2013)
Daniela Graf Stillfried, Martti Toivakka, Parvez Alam
Journal of Materials Science
View on publisher's site
A1 Journal article (refereed)
Editorial : guest editorial to this special issue (2013)
Wilhelm Schabel, Martti Toivakka
Chemical Engineering and Processing
View on publisher's site
A1 Journal article (refereed)
Effects of fibre-surface morphology on the mechanical properties of Porifera-inspired rubber-matrix composites (2013)
Parvez Alam , Daniela Graf Stillfried, Jessika Celli, Martti Toivakka
Applied Physics A: Materials Science and Processing
View on publisher's site
A1 Journal article (refereed)
Flexographic printing of PEDOT:PSS on coated papers for printed functionality (2013)
Dimitar Valtakari, Roger Bollström, Mikko Tuominen, Hannu Teisala, Mikko Aromaa, Martti Toivakka, Jurkka Kuusipalo, Jyrki M. Mäkelä, Jun Uozumi, Jarkko J. Saarinen
Journal of print and media technology research
A1 Journal article (refereed)
High- and low-adhesive superhydrophobicity on the liquid flame spray-coated board and paper: structural effects on surface wetting and transition between the low- and high-adhesive states (2013)
Hannu Teisala, Mikko Tuominen, Mikko Aromaa, Milena Stepien, Jyrki M. Mäkelä, Jarkko J. Saarinen, Martti Toivakka, Jurkka Kuusipalo
Colloid and Polymer Science
View on publisher's site
A1 Journal article (refereed)
Impact of functionalised dispersing agents on the mechanical and viscoelastic properties of pigment coating (2013)
F. Touaiti, M. Pahlevan, R. Nilsson, P. Alam, M. Toivakka, M.P. Ansell, C.E. Wilen
Progress in Organic Coatings
View on publisher's site
A1 Journal article (refereed)
Molecular modeling studies of interactions between sodium polyacrylate polymer and calcite surface (2013)
A Ylikantola, J. Linnanto, J. Knuutinen, A. Oravilahti, M. Toivakka
Applied Surface Science
View on publisher's site
A3 Book section, Chapters in research books
Nanoparticle depositon on packaging materials by liquid flame spray generation of superhydrophilic and superhydrophobic coatings (2013)
Hannu Teisala, Mikko Tuominen, Mikko Aromaa, Milena Stepien, Jyrki M. Mäkelä, Jarkko J. Saarinen, Martti Toivakka, Jurkka Kuusipalo
CRC Press
View on publisher's site
A4 Conference proceedings
Paper substrate for printed functionality (2013)
Roger Bollström, Martti Toivakka
The Pulp and Paper Fundamental Research Society
A4 Conference proceedings
Short time water absorption into multilayer curtain coated linerboard (2013)
Stig Renvall, Vinay Kumar, Martti Toivakka, Pekka Salminen
TAPPI Press
A4 Conference proceedings
Temperature effects on dynamic water absorption into paper (2013)
Joel Songok, Pekka Salminen, Martti Toivakka
University of Mons
A1 Journal article (refereed)
The effect of flame treatment on surface properties and heat sealability of low-density polyethylene coating (2013)
Mikko Tuominen, M. Ek, P. Saloranta, M. Toivakka, J. Kuusipalo
Packaging Technology and Science
View on publisher's site
A1 Journal article (refereed)
Thermomechanical properties of CaCO₃-latex pigment coatings: impact of modified dispersing agents (2013)
F Touaiti, P Alam, R Nilsson, M Pahlevan, MP Ansell, CE Wilen, M. Toivakka
Progress in Organic Coatings
View on publisher's site
A1 Journal article (refereed)
ToF-SIMS analysis of UV-switchable TiO₂-nanoparticle-coated paper surface (2013)
Milena Stepien, Jarkko J. Saarinen, Hannu Teisala, Mikko Tuominen, Mikko Aromaa, Janne Haapanen, Jurkka Kuusipalo, Jyrki M. Mäkelä, and Martti Toivakka
Langmuir
View on publisher's site
A1 Journal article (refereed)
Wear resistance of nanoparticle coatings on paperboard (2013)
Milena Stepien, Gary Chinga-Carrasco, Jarkko J. Saarinen, Hannu Teisala, Mikko Tuominen, Mikko Aromaa, Janne Haapanen, Jurkka Kuusipalo, Jyrki M. Mäkelä, Martti Toivakka
Wear
View on publisher's site
A1 Journal article (refereed)
Wettability conversion on the liquid flame spray generated superhydrophobic TiO₂ nanoparticle coating on paper and board by photocatalytic decomposition of spontaneously accumulated carbonaceous overlayer (2013)
Hannu Teisala, Mikko Tuominen, Milena Stepien, Janne Haapanen, Jyrki M. Mäkelä, Jarkko J. Saarinen, Martti Toivakka, Jurkka Kuusipalo
Cellulose
View on publisher's site
A1 Journal article (refereed)
Atmospheric synthesis of superhydrophobic TiO₂ nanoparticle deposits in a single step using Liquid Flame Spray (2012)
Mikko Aromaa, Anssi Arffman, Heikki Suhonen, Janne Haapanen, Jorma Keskinen, Mari Honkanen, Juha-Pekka Nikkanen, Erkki Levänen, Maria E. Messing, Knut Deppert, Hannu Teisala, Mikko Tuominen, Jurkka Kuusipalo, Milena Stepien, Jarkko J. Saarinen, Martti Toivakka, Jyrki M. Mäkelä
Journal of Aerosol Science
View on publisher's site
A4 Conference proceedings
Changes in solid particle fraction of coating colors in high speed blade coating (2012)
Anne Rutanen, Martti Toivakka
TAPPI Press
A4 Conference proceedings
Conductive surfaces on coated papers by flexographical printing (2012)
Dimitar Valtakari, Roger Bollström, Martti Toivakka, Mikko Tuominen, Hannu Teisala, Jurkka Kuusipalo, Mikko Aromaa, Jyrki M. Mäkelä, Jun Uozumi, Jarkko J. Saarinen
TAPPI Press
A1 Journal article (refereed)
DMTA investigation of solvents effects on viscoelastic properties of porous CaCO₃-SBR latex composites (2012)
F. Touaiti, P. Alam, M. Toivakka, M.P. Ansell
Mechanics of Materials
View on publisher's site
A1 Journal article (refereed)
Drying of porous coating: influence of coating composition (2012)
Joel Songok, Douglas Bousfield, Cathy Ridgway, Patrick Gane, Martti Toivakka
Industrial & Engineering Chemistry Research
View on publisher's site
A4 Conference proceedings
Elucidating the mechanisms of liquid and vapour transport during drying of porous coatings (2012)
Joel Songok, Douglas Bousfield, Cathy Ridgway, Patrick Gane, Martti Toivakka
TAPPI Press
A1 Journal article (refereed)
Fatigue life predictions of porous composite paper coatings (2012)
Natalie Fern, Parvez Alam, Farid Touaiti, Martti Toivakka
International Journal of Fatigue
View on publisher's site
A4 Conference proceedings
Flame deposition of superhydrophobic and superhydrophilic nanoparticle coatings on paperboard materials (2012)
M. Aromaa, J. Haapanen, H. Teisala, M. Tuominen, M. Stepien, J.J. Saarinen, M. Toivakka, J. Kuusipalo, J.M. Mäkelä
Nano Science and Technology Institute
A4 Conference proceedings
Heat and mass transfer models to understand the drying mechanisms of a porous substrate (2012)
Joel Songok, Douglas Bousfield, Patrick Gane, Martti Toivakka
Innventia
A1 Journal article (refereed)
Measuring solvent barrier properties of paper (2012)
Roger Bollström, Jarkko J Saarinen, Jukka Räty, Martti Toivakka
Measurement Science and Technology
View on publisher's site
A1 Journal article (refereed)
Nanostructures increase water droplet adhesion on hierarchically rough superhydrophobic surfaces (2012)
Hannu Teisala, Mikko Tuominen, Mikko Aromaa, Milena Stepien, Jyrki M. Mäkelä, Jarkko J. Saarinen, Martti Toivakka, Jurkka Kuusipalo
Langmuir
View on publisher's site
A4 Conference proceedings
On the mechanisms of wet and dry strength of paper coatings: Part 1 - experimental studies (2012)
Etienne Lazarus, Martti Toivakka, Parvez Alam, Pekka J. Salminen
TAPPI Press
A4 Conference proceedings
On the mechanisms of wet and dry strength of paper coatings : Part 2 - modeling and simulation (2012)
Parvez Alam, Martti Toivakka, Etienne Lazarus, Pekka J. Salminen
TAPPI Press
A4 Conference proceedings
Optimizing barrier properties of dispersion coating (2012)
Bollström R, Nyqvist R, Preston J, Salminen P, Toivakka M
TAPPI Press
A1 Journal article (refereed)
Short time spreading and wetting of offset printing liquids on model calcium carbonate coating structures (2012)
Hanna Koivula, Martti Toivakka, Patrick Gane
Journal of Colloid and Interface Science
View on publisher's site
A4 Conference proceedings
Surface characterization of nanoparticle coated paperboard (2012)
Milena Stepien, Jarkko J. Saarinen, Hannu Teisala, Mikko Tuominen, Mikko Aromaa, Jurkka Kuusipalo, Gary Chinga Carrasco, Jyrki M. Mäkelä, Martti Toivakka
Nano Science and Technology Institute
A1 Journal article (refereed)
Surface chemical analysis of photocatalytic wettability conversion of TiO₂ nanoparticle coating (2012)
Milena Stepien, Jarkko J. Saarinen, Hannu Teisala, Mikko Tuominen, Mikko Aromaa, Jurkka Kuusipalo, Jyrki M. Mäkelä, Martti Toivakka
Surface and Coatings Technology
View on publisher's site
A1 Journal article (refereed)
Surface chemical characterization of nanoparticle coated paperboard (2012)
Milena Stepien, Jarkko J. Saarinen, Hannu Teisala, Mikko Tuominen, Mikko Aromaa, Jurkka Kuusipalo, Jyrki M. Mäkelä, Martti Toivakka
Applied Surface Science
View on publisher's site
A1 Journal article (refereed)
The self-organization of starch on paper (2012)
Mika Anttila, Kirsi Kataja, Laura Kela, Sari Hyvärinen, Henna Lampinen, Martti Toivakka

Nordic Pulp and Paper Research Journal
View on publisher's site
A1 Journal article (refereed)
Top layer coatability on barrier coatings (2012)
Roger Bollström, Mikko Tuominen, Anni Määttänen, Jouko Peltonen, Martti Toivakka
Progress in Organic Coatings
View on publisher's site
A1 Journal article (refereed)
Adjustable wettability of paperboard by liquid flame spray nanoparticle deposition (2011)
Milena Stepien, Jarkko J. Saarinen, Hannu Teisala, Mikko Tuominen, Mikko Aromaa, Jurkka Kuusipalo, Jyrki M. Mäkelä, Martti Toivakka
Applied Surface Science
View on publisher's site
A4 Conference proceedings
Adjusting wetting properties of paperboard by liquid flame spray process (2011)
M. Stepien, J. J. Saarinen, H. Teisala, M. Tuominen, M. Aromaa, J. Kuusipalo, J. M. Mäkelä, M. Toivakka
Åbo Akademi
A4 Conference proceedings
A modified stokesian dynamics method for mineral suspensions (2011)
Anders Sand, Martti Toivakka, Jan Rosenkranz
International Center for Numerical Methods in Engineering (CIMNE)
A4 Conference proceedings
Controlled wettability of nanoparticle coated paperboard (2011)
Stepien M, Saarinen J, Teisala H, Tuominen M, Aromaa M, Kuusipalo J, Toivakka M
Surface Science Society of Japan
A1 Journal article (refereed)
Depletion of coating color components in the blade coating process circulation (2011)
Anne Rutanen, Martti Toivakka
Tappi Journal
A1 Journal article (refereed)
Electrodeposition of PEDOT-Cl film on a fully printed Ag/polyaniline electrode (2011)
Petri Ihalainen, Anni Määttänen, Ulriika Mattinen, Milena Stępień, Roger Bollström, Martti Toivakka, Johan Bobacka, Jouko Peltonen
Thin Solid Films
View on publisher's site
A4 Conference proceedings
Eletrônica Impressa em Papel Através de Aplicação por Cortina Multicamadas (2011)
Bollström Roger, Tobjörk Daniel, Toivakka Martti, Salminen Pekka, Natalense Julio
ABTCP
A1 Journal article (refereed)
Fracture and plasticity in nano-porous particle-polymer composites (2011)
Parvez Alam, Martti Toivakka
Key Engineering Materials
View on publisher's site
A4 Conference proceedings
Fundamental mechanisms for dry and wet coating strength (2011)
Etienne Lazarus, Pekka Salminen, Parvez Alam, Martti Toivakka
PTS
A4 Conference proceedings
Generation and stimulation of liquid flame spray (LFS) coating (2011)
Mikko Tuominen, Hannu Teisala, Mikko Aromaa, Milena Stepien, Jyrki M. Mäkelä, Jarkko J. Saarinen, Martti Toivakka, Jurkka Kuusipalo
MST Conferences
A1 Journal article (refereed)
Incorporation of laccase in pigment coating for bioactive paper applications (2011)
Piia Gustafsson, Stina Grönqvist, Martti Toivakka, Maria Smolander, Tomi Erho, Jouko Peltonen
Nordic Pulp and Paper Research Journal
A1 Journal article (refereed)
Nanoparticle deposition from liquid flame spray onto moving roll-to-roll paperboard material (2011)
Jyrki M. Mäkelä, Mikko Aromaa, Hannu Teisala, Mikko Tuominen, Milena Stepien, Jarkko J. Saarinen, Martti Toivakka, Jurkka Kuusipalo
Aerosol Science and Technology
View on publisher's site
A3 Book section, Chapters in research books
Predicting the cause of operational anomalies in blade coating (2011)
P. Alam, C. Stoor, M. Toivakka
Wit press
View on publisher's site
A1 Journal article (refereed)
Structure formation mechanisms in consolidating pigment coatings - Simulation and visualisation (2011)
Anders Sand, Jani Kniivilä, Martti Toivakka, Tuomo Hjelt
Chemical Engineering and Processing
View on publisher's site
A1 Journal article (refereed)
Temperature and moisture effects on wetting of calcite surfaces by offset ink constituents (2011)
Hanna Koivula, Hajer Kamal Alm, Martti Toivakka
Colloids and Surfaces A: Physicochemical and Engineering Aspects
View on publisher's site
A4 Conference proceedings
Cohesive versus adhesive mechanisms of failure in paper coatings - a modelling approach (2010)
Parvez Alam, Martti Toivakka
TAPPI Press
A4 Conference proceedings
Controlled wettability of paperboard by nanoparticles using liquid flame spray process (2010)
Milena Stepien, Jarkko J. Saarinen, Hannu Teisala, Mikko Tuominen, Mikko Aromaa, Jurkka Kuusipalo, Jyrki Mäkelä, Martti Toivakka

TAPPI Press
A1 Journal article (refereed)
Enhanced surface wetting of pigment coated paper by UVC irradiation (2010)
Anni Määttänen, Petri Ihalainen, Roger Bollström, Shaoxia Wang, Martti Toivakka, Jouko Peltonen
Industrial & Engineering Chemistry Research
View on publisher's site
A1 Journal article (refereed)
Evaluation of plasma-deposited hydrophobic coatings on pigment-coated paper for reduced dampening water absorption (2010)
M. Pykönen, K. Johansson, M. Dubreuil, D. Vangeneugden, G. Ström, P. Fardim, M. Toivakka
Journal of Adhesion Science and Technology
View on publisher's site
A1 Journal article (refereed)
Improved prediction of offset ink setting rates based on experimental data and filtration equations (2010)
Hanna Koivula, Douglas Bousfield, Martti Toivakka
Industrial & Engineering Chemistry Research
View on publisher's site
A4 Conference proceedings
Influence of atmospheric plasma treatment on surface properties and inkjet printability of plastic packaging film (2010)
Johanna Lahti, Kim Eiroma, Tiia-Maria Tenhunen, Maiju Pykönen, Martti Toivakka
The International Association of Research Organisanisations for the Information, Media and Graphics Arts Industry
A1 Journal article (refereed)
Influence of plasma activation on absorption of offset ink components into pigment-coated paper (2010)
Maiju Pykönen, Hanna Silvaani, Janet Preston, Pedro Fardim, Martti Toivakka
Nordic Pulp and Paper Research Journal
A4 Conference proceedings
Influence of plasma coating on fluid absorption into pigment-coated paper (2010)
Maiju Pykönen, Roger Bollström, Martti Toivakka, Pedro Fardim, Kenth Johansson, Göran Ström
TAPPI Press
A4 Conference proceedings
Influence of plasma surface modification on printability of coated paper (2010)
Pykoenen Maiju, Johansson Kenth, Larsson Johan, Toivakka Martti
Japanese Society of Printing Science and Technology
A1 Journal article (refereed)
Influence of surface chemical composition on UV-varnish absorption into permeable pigment-coated paper (2010)
Maiju Pykönen, Kenth Johansson, Roger Bollström, Pedro Fardim, Martti Toivakka
Industrial & Engineering Chemistry Research
View on publisher's site
A4 Conference proceedings
Influence of UVC treatment on sheetfed offset print quality (2010)
Roger Bollström, Anni Määttänen, Petri Ihalainen, Jouko Peltonen, Martti Toivakka
iarigai - The International Association of Research Organizations for the Information, Media and Graphic Arts Industries
A1 Journal article (refereed)
Molecular modeling studies of interactions between styrene-butadiene latex and sodium polyacrylate polymer surface (2010)
A. Ylikantola, J. Linnanto, J. Knuutinen, M. Toivakka
Journal of Molecular Structure: THEOCHEM
View on publisher's site
A4 Conference proceedings
Nanoparticle deposition on packaging materials by the liquid flame spray (2010)
Hannu Teisala, Mikko Tuominen, Mikko Aromaa, Jyrki M. Mäkelä, Milena Stepien, Jarkko J. Saarinen, Martti Toivakka, Jurkka Kuusipalo
TAPPI Press
A1 Journal article (refereed)
Polymer chain pinning at interfaces in CaCO₃-SBR latex composites (2010)
F. Touaiti, P. Alam, M. Toivakka, D.W. Bousfield
Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing
View on publisher's site
A4 Conference proceedings
Printed functionality on a multilayer coated paper (2010)
Saarinen Jarkko J., Bollstroem Roger, Maeaettaenen Anni, Ihalainen Petri, Peltonen Jouko, Toivakka Martti
Japanese Society of Printing Science and Technology
A4 Conference proceedings
Roll-to-roll flame deposition of functional nanoparticle surface on paperboard materials (2010)
Mikko Aromaa, Hannu Teisala, Tuominen Mikko, Milena Stepien, Jarkko J. Saarinen, Martti Toivakka, Kuusipalo Jurkka, Jyrki M. Mäkelä
American Institute of Chemical Engineers
A4 Conference proceedings
Time dependent modeling of blade metering (2010)
Alam P, Stoor C, Toivakka M
COMSOL
A1 Journal article (refereed)
Use of confocal laser scanning microscopy and a computer model to understand ink cavitation and filamentation (2010)
Hanna Koivula, Douglas Bousfield, Martti Toivakka
Tappi Journal
A1 Journal article (refereed)
Wetting and print quality study of an inkjet-printed poly(3-hexylthiophene) on pigment coated papers (2010)
Anni Määttänen, Petri Ihalainen, Roger Bollström, Martti Toivakka, Jouko Peltonen
Colloids and Surfaces A: Physicochemical and Engineering Aspects
View on publisher's site
A4 Conference proceedings
An attempt to reduce Dampening water absorption using hydrophobic plasma coatings (2009)
Pykönen M, Johansson K, Dubreuil M, Vangeneugden D, Ström G, Fardim P, Toivakka M
A1 Journal article (refereed)
A particle motion model for the study of consolidation phenomena (2009)
Sand A, Nopola T, Hjelt T, Toivakka M
Computers and Chemical Engineering
View on publisher's site
A1 Journal article (refereed)
Balancing between Fold-crack Resistance and Stiffness (vol 43, pg 1265, 2009) (2009)
Alam P, Toivakka M, Carlsson R, Salminen P, Sandås S
Journal of Composite Materials
A4 Conference proceedings
Bioactive Pigment Coatings Comprising Enzymes (2009)
Gustafsson P, Grönqvist S, Smolander M, Erho T, Toivakka M, Peltonen J
A1 Journal article (refereed)
Calculating the permeability of model paper coating structures comprising incongruent particle shapes and sizes (2009)
Alam P, Byholm T, Kniivilä J, Sinervo L, Toivakka M
Microporous and Mesoporous Materials
View on publisher's site
A4 Conference proceedings
Coated paper microstructure: particle shape - microstructure interrelations (2009)
J. Preston, M. Toivakka, P. Heard, G. Chinga-Carrasco
TAPPI Press
A3 Book section, Chapters in research books
Coating layer consolidation and formation of the coating layer structure (2009)
Grön J, Salminen P, Toivakka M, Paltakari J
Paperi ja Puu
Paperi ja Puu Oy
A4 Conference proceedings
Colloidal Interactions and Particle Clustering in Consolidating Pigment Coating Layers (2009)
Sand A, Toivakka M, Hjelt T
A1 Journal article (refereed)
Comparison of dynamic print gloss measurement techniques (2009)
Koivula H, Juuti M, Bousfield D, Preston J, Silvennoinen R, Peiponen KE, Toivakka M
Tappi Journal
A1 Journal article (refereed)
Deflection and plasticity of soft-tip bevelled blades in paper coating operations (2009)
Alam P, Toivakka M
Materials and Design
View on publisher's site
A1 Journal article (refereed)
Effective packing of 3-dimensional voxel-based arbitrarily shaped particles (2009)
Byholm T, Toivakka M, Westerholm J
Powder Technology
View on publisher's site
A4 Conference proceedings
Improved flexography printing of wax-coated paperboard through atmospheric pressure plasma treatment (2009)
Pykönen M, Johansson K, Larsson J, Fardim P, Toivakka M
A1 Journal article (refereed)
Influence of colloidal interactions on pigment coating layer structure formation (2009)
Sand A, Toivakka M, Hjelt T
Journal of Colloid and Interface Science
View on publisher's site
A4 Conference proceedings
Ink formulation with the new Multi-Phase Ink Model (2009)
Saari J, Bollström R, Mueller K, Toivakka M
A4 Conference proceedings
Microstructure development in consolidating pigment coatings studied by numerical simulation (2009)
Sand A, Kniivilä J, Toivakka M, Hjelt T
A4 Conference proceedings
Multilayer-coated fiber based substrate for printed functional devices (2009)
Määttänen A, Bollström R, Tobjörk D, Ihalainen P, Toivakka M, Peltonen J
A1 Journal article (refereed)
Plasma activation induced changes in surface chemistry of pigment coating components (2009)
Pykonen M, Silvaani H, Preston J, Fardim P, Toivakka M
Colloids and Surfaces A: Physicochemical and Engineering Aspects
View on publisher's site
A4 Conference proceedings
Printed low-voltage organic transistors on paper substrates (2009)
Tobjörk D, Kaihovirta N, Bollström R, Määttänen A, Mäkelä T, Ihalainen P, Peltonen J, Toivakka M, Österback R
A1 Journal article (refereed)
The influence of different roughness scales of pigment coated papers on print gloss (2009)
Jarnstrom J, Ihalainen P, Lemstrom A, Toivakka M, Peltonen J
Nordic Pulp and Paper Research Journal
A1 Journal article (refereed)
A diffractive gloss meter for local gloss measurements of papers and prints (2008)
Juuti M, Koivula H, Toivakka M, Peiponen KE
Tappi Journal
A1 Journal article (refereed)
Ageing effect in atmospheric plasma activation of paper substrates (2008)
Pykönen M, Sundqvist H, Kaukoniemi OV, Tuominen M, Lahti J, Fardim P, Toivakka M
Surface and Coatings Technology
View on publisher's site
A3 Book section, Chapters in research books
A new test method to measure dynamic contact in a printing nip for rotogravure papers (2008)
Preston J, Bollström R, Nylander K, Toivakka M, Peltonen J
iarigai - The International Association of Research Organizations for the Information, Media and Graphic Arts Industries
A4 Conference proceedings
A theoretical approach to understanding microstructure-tensile modulus relations in paper coatings (2008)
Alam P, Mathur S, Byholm T, Järvinen O, Kniivilä J, Toivakka M
A4 Conference proceedings
Coating Layer Consolidation and the Influence of Drying Strategy - A Numerical Study (2008)
Sand A, Toivakka M, Hjelt T
A1 Journal article (refereed)
Effects of atmospheric plasma activation on surface properties of pigment-coated and surface-sized papers (2008)
Pykönen M, Sundqvist H, Järnström J, Kaukoniemi OV, Tuominen M, Lahti J, Peltonen J, Fardim P, Toivakka M
Applied Surface Science
View on publisher's site
A1 Journal article (refereed)
Influence of atmospheric plasma activation on sheet-fed offset print quality (2008)
Pykönen M, Sundqvist H, Tuominen M, Lahti J, Preston J, Fardim P, Toivakka M
Nordic Pulp and Paper Research Journal
A1 Journal article (refereed)
Influence of drying strategy on coating layer structure formation (2008)
Sand A, Toivakka M, Hjelt T
Nordic Pulp and Paper Research Journal
A1 Journal article (refereed)
Influence of ink components on print rub (2008)
Koivula H, Gane P, Toivakka M
Nordic Pulp and Paper Research Journal
A1 Journal article (refereed)
Influence of plasma activation on absorption of ink components and dampening water in sheet-fed offset printing (2008)
Pykönen M, Silvaani H, Preston J, Fardim P, Toivakka M
Advances in printing and media technology
A1 Journal article (refereed)
Investigation of filtercake stability using numerical simulation technique (2008)
Sand A, Toivakka M, Hjelt T
Tappi Journal
A1 Journal article (refereed)
Micro-buckling of paper during blade metering (2008)
Alam P, Toivakka M
Computers and Chemical Engineering
View on publisher's site
A4 Conference proceedings
Micro-mechanics of high porosity particle-polymer composites (2008)
Alam P, Mathur S, Byholm T, Jarvinen O, Kniivila J, Toivakka M
DEStech Publications Inc.
A1 Journal article (refereed)
On estimation of complex refractive index and colour of dry black and cyan offset inks by a multi-function spectrophotometer (2008)
Peiponen KE, Kontturi V, Niskanen I, Juuti M, Raty J, Koivula H, Toivakka M
Measurement Science and Technology
View on publisher's site
A4 Conference proceedings
Small Particle Migration Mechanisms in Consolidating Pigment Coating Layers (2008)
Sand A, Toivakka M, Hjelt T
A1 Journal article (refereed)
Small particle mobility in consolidating coating layers (2008)
Sand A, Toivakka M, Hjelt T
Nordic Pulp and Paper Research Journal
A1 Journal article (refereed)
Visualisation of the distribution of offset ink components printed onto coated paper (2008)
Koivula H, Preston JS, Heard PJ, Toivakka M
Colloids and Surfaces A: Physicochemical and Engineering Aspects
View on publisher's site
A4 Conference proceedings
A Diffractive Glossmeter for Local Gloss Measurements of Papers and Prints (2007)
Juuti M, Koivula H, Toivakka M, Peiponen K
A1 Journal article (refereed)
Assessment of the complex refractive index of an optically very dense solid layer: Case study offset magenta ink (2007)
Niskanen I, Räty J, Peiponen KE, Koivula H, Toivakka M
Chemical Physics Letters
View on publisher's site
A4 Conference proceedings
Balancing between fold crack resistance and stiffness - Part 1: modelling and simulation (2007)
Alam P, Toivakka M, Carlsson R, Salminen P, Sandås S
A4 Conference proceedings
Balancing between fold crack resistance and stiffness - Part 2: experimental study (2007)
Carlsson R, Alam P, Salminen P, Sandås S, Toivakka M
A1 Journal article (refereed)
Detection of local specular gloss and surface roughness from black prints (2007)
Juuti M, Prykäri T, Alarousu E, Koivula H, Myllys M, Lähteelä A, Toivakka M, Timonen J, Myllylä R, Peiponen KE
Colloids and Surfaces A: Physicochemical and Engineering Aspects
View on publisher's site
A4 Conference proceedings
Effects of atmospheric pressure plasma activation on inkjet print quality (2007)
Pykönen M, Hakola L, Eiroma K, Lahti J, Sundqvist H, Kaukoniemi OV, Tuominen M, Järnström J, Peltonen J, Fardim P, Toivakka M
NIP & Digital Fabrication Conference
A4 Conference proceedings
Effects of Atmospheric Pressure Plasma Activation on Paper and Printability (2007)
Pykönen M, Sundqvist H, Kaukoniemi O, Hakola L, Eiroma K, Tuominen M, Lahti J, Järnström J, Peltonen J, Fardim P, Toivakka M
A1 Journal article (refereed)
Impact spreading and absorption of Newtonian droplets on topographically irregular porous materials (2007)
Alam P, Toivakka M, Backfolk K, Sirviö P
Chemical Engineering Science
View on publisher's site
A4 Conference proceedings
Plastek: Atmospheric plasma treatment (2007)
Kuusipalo J, Tuominen M, Lahti J, Lahtinen K, Nättinen K, Nikkola J, Vartiainen J, Mannila J, Kallio M, Hurme E, Kaukoniemi O, Sundqvist H, Erho T, Hakola L, Toivakka M, Pykönen M, Harlin A, Peltola M
A4 Conference proceedings
The elastic modulus of paper coating in tension and compression (2007)
Alam P, Xu Q, Toivakka M, Hämäläinen H, Syrjälä S
A1 Journal article (refereed)
Topography and gloss of precipitated calcium carbonate coating layers on a model substrate (2007)
Jarnstrom J, Sinervo L, Toivakka M, Peltonen J
Tappi Journal
A1 Journal article (refereed)
Calculating tortuosity in quasi-random anisotropic packings (2006)
Alam P, Byholm T, Toivakka M
Nordic Pulp and Paper Research Journal
View on publisher's site
A4 Conference proceedings
Characterization of Pigment Particle Surfaces by ToF-SIMS (2006)
Koivula H, Fardim P, Toivakka M
A4 Conference proceedings
Dynamic spreading and absorption of impacting droplets on topographically irregular porous substrates (2006)
Alam P, Toivakka M, Backfolk K, Sirviö P
A4 Conference proceedings
Investigation of Filter Cake Stability using Numerical Simulation Technique (2006)
Sand A, Toivakka M, Hjelt T
A4 Conference proceedings
Topography and gloss of paper coating layers (2006)
Järnström J, Peltonen J, Sinervo L, Toivakka M
A4 Conference proceedings
Multiphysics modelling of coating process technology (2005)
Alam P, Toivakka M
A4 Conference proceedings
The interfacial slippage of paper during blade metering (2005)
Alam P, Toivakka M
A4 Conference proceedings
Surface tension driven leveling of spray droplets (2003)
Bousfield D, Toivakka M
A1 Journal article (refereed)
A simulation model to predict coating coverage (2001)
Toivakka M
Paperi ja puu
A1 Journal article (refereed)
Leveling of surface defects in thin films of pigmented coatings (2001)
Toivakka M, Kokko A, Salminen P, Urscheler R, Bousfield DW
Nordic Pulp and Paper Research Journal
A4 Conference proceedings
Modeling of coating layer mechanical properties (2001)
Martti O. Toivakka, Douglas W. Bousfield
TAPPI Press
TAPPI Press
A1 Journal article (refereed)
Pore space characterization of coating layers (2001)
Toivakka M, Nyfors K
Tappi Journal
A3 Book section, Chapters in research books
Consolidation of coating layer (2000)
Pekka Salminen, Martti Toivakka
Fapet Oy
A4 Conference proceedings
Modeling of short-time penetration into complex porous structures (2000)
D. Bousfield, M. Toivakka, S. Pellerin
TAPPI Press
A4 Conference proceedings
Pore space characterization of coating layers (2000)
Martti Toivakka, Kjell Nyfors
TAPPI Press
TAPPI Press
A4 Conference proceedings
Dynamic simulation of particle motion in pigment coating colors (1999)
Martti Toivakka
Korean Society of Wood Science and Technology
A1 Journal article (refereed)
Levelling of coating suspensions (1999)
Toivakka MO, Bousfield DW
Journal of Pulp and Paper Science
A4 Conference proceedings
Consolidation of particulate suspension - model study with plastic pigments (1997)
Martti Toivakka, Pekka Salminen, Yohannes Chonde, Douglas Bousfield
TAPPI Press
A4 Conference proceedings
Simulation of relaxation-induced dilatancy (1997)
A.E. Välimäki, M.O. Toivakka
TAPPI Press
A4 Conference proceedings
Floc characterization in highly turbulent fiber suspensions by digital image analysis (1996)
Beghello L, Toivakka M, Wahren D, Eklund D
A4 Conference proceedings
A device for measuring fiber sizes in highly turbulent fiber suspensions (1995)
Beghello L, Toivakka M, Eklund D, Lindström T
Canadian Pulp and Paper Association
A4 Conference proceedings
Prediction of suspension rheology through particle motion simulation (1995)
Toivakka M, Eklund D
TAPPI Press
A1 Journal article (refereed)
Prediction of suspension viscoelasticity through particle motion modeling (1995)
Martti Toivakka, Dan Eklund, Douglas W Bousfield
Journal of Non-Newtonian Fluid Mechanics
View on publisher's site
A4 Conference proceedings
Pigment motion during drying (1992)
Toivakka M, Eklund D, Bousfield DW
TAPPI Press
A4 Conference proceedings
Simulation of pigment motion during drying (1992)
Toivakka M, Eklund D, Bousfield DW
TAPPI Press


Other publications

D3 Professional conference proceedings
Roll-to-roll coating of cellulose nanofiber suspensions (2016)
Toivakka M., Kumar V., Elfving A., Nazari B., Bousfield D. W.
South China University of Technology Press
D3 Professional conference proceedings
Roll-to-roll coating of cellulose nanofiber suspensions (2016)
Vinay Kumar, Axel Elfving, Behzad Nazari, Douglas W. Bousfield, Martti Toivakka
International Society of Coating Science and Technology
D3 Professional conference proceedings
The effect of latex characteristics and addition level on the properties of cellulose nanofibre films (2016)
Kumar V., Lazarus E., Salminen P., Bousfield D. W., Toivakka M.
South China University of Technology Press
D3 Professional conference proceedings
Simulation of magnetic particle suspensions using the Stokesian dynamics technique (2015)
Sand A., Stener J., Toivakka M., Carlson J., Pålsson B.
Luleå tekniska universitet
D5 Textbook, professional manual or guide
Pigment Coating (2014)
Martti Toivakka, Pekka Salminen
Styron S/B Latex Zhangjiagang Company Ltd
G2 Master’s thesis, polytechnic Master’s thesis
Simulering av partikelrörelse i bestrykningsskiktet under torkning (1991)
Martti Toivakka


Other Research Activities


Last updated on 2018-19-09 at 19:45