Roll-to-roll coating of cellulose nanofiber suspensions

D3 Professionell konferenspublikation

Interna författare/redaktörer

Publikationens författare: Vinay Kumar, Axel Elfving, Behzad Nazari, Douglas W. Bousfield, Martti Toivakka
Redaktörer: ISCST
Publiceringsår: 2016
Förläggare: International Society of Coating Science and Technology
Moderpublikationens namn: Proceedings of the 18th International Coating Science and Technology Symposium


Micro- and nanoscale cellulosic fiber materials have recently been intensively studied for potential uses in various applications. Examples range from use as rheology modifier, cell growth matrix or aero gel to transparent “nanopaper”, membrane filters and barrier coatings and films. The coating applications have been motivated by the high oxygen and grease barrier of the nanocellulosic films. However, most research so far has been limited to small, batch-produced samples. Reports on continuous processing into films or coatings, which is required for large-scale low cost production, are few. Similarly, high deformation rate rheology of nanocellulose, which is relevant for high speed coating operations, has not been reported. The current work measures high shear rate viscosity of cellulose nanofibers utilizing slot geometry and compares the results to those obtained with parallel plate and concentric cylinder devices. The high apparent shear-thinning behavior, which results in low effective process viscosity at high deformation rates, enables roll-to-roll coating of highly viscous, gel-like cellulose nanofiber suspension on paper.

Senast uppdaterad 2020-23-09 vid 06:40