Cellulose fibre-reinforced biofoam for structural applications

A1 Originalartikel i en vetenskaplig tidskrift (referentgranskad)


Interna författare/redaktörer


Publikationens författare: Jasmina Obradovic, Mikko Voutilainen, Pasi Virtanen, Lippo Lassila, Pedro Fardim
Förläggare: Multidisciplinary Digital Publishing Institute
Förlagsort: Basel
Publiceringsår: 2017
Tidskrift: Materials
Tidskriftsakronym: Materials
Volym: 10
Nummer: 6
Artikelns första sida, sidnummer: 619
eISSN: 1996-1944


Abstrakt

Traditionally, polymers and macromolecular components used in foam industry are mostly derived from petroleum. The current transition to bioeconomy creates demand for use of more renewable feedstocks. Soybean oil is a vegetable oil, composed mainly of triglycerides, that is suitable material for foam production. In this study, acrylated epoxidized soybean oil and variable amounts of cellulose fibres were used in a production of bio-based foam. The developed macroporous bio-based architectures were characterized by several techniques, including porosity measurements, nanoindentation testing, scanning electron microscopy and thermogravimetric analysis. It was found that the introduction of cellulose fibres during the foaming process was necessary to create the three-dimensional polymer foams. Using cellulose fibres has potential as foam stabilizer because it obstructs drainage of liquid from the film region in these gas-oil interfaces while simultaneously acting as reinforcing agent in the polymer foam. The resulting bio-based macroporous polymers possessed a porosity of approximately 56%, and incorporation of cellulose fibres did not affected thermal behaviour. Scanning electron micrographs showed randomly oriented pores with irregular shapes and non-uniform pore size throughout the samples.


Dokument


Senast uppdaterad 2019-15-10 vid 02:33