Glyoxal improved functionalization of starch with AZC enhances the hydrophobicity, strength and UV blocking capacities of co-crosslinked polymer

A1 Originalartikel i en vetenskaplig tidskrift (referentgranskad)


Interna författare/redaktörer


Publikationens författare: Shuzhen Ni, Baobin Wang, Hui Zhang, Yongchao Zhang, Zhulan Liu, Weibing Wu, Huining Xiao, Hongqi Dai
Publiceringsår: 2019
Tidskrift: European Polymer Journal
Tidskriftsakronym: Eur. Polym. J.
Volym: 110
Artikelns första sida, sidnummer: 385
Artikelns sista sida, sidnummer: 393
eISSN: 1873-1945


Abstrakt

An effective and facile approach to functionalize starch was developed using glyoxal and ammonium zirconium carbonate (AZC) as the co-crosslinking agents. The resultant starch was characterized for chemical structure, surface morphology, thermal stability, optical and hydrophobic properties and mechanical strength. 1H and 13C nuclear magnetic resonance (NMR) spectrum confirmed the successful Schiff-base reaction on the starch. X-ray diffraction (XRD) showed that the low glyoxal dosage had an adverse impact on the degree of crystallinity. Thermalgravimetric (TG) results revealed the weakened thermal stability at the initial decomposition process and enhanced thermal stability above the maximum degradation temperature. A smoother surface on the resultant film was observed by scanning electron microscopy (SEM) after the addition of glyoxal. Significantly, enhanced mechanical and hydrophobic properties as well as ultraviolet (UV) blocking capacity of the resultant starch film were achieved at 5% (wt) glyoxal and 5% (wt) AZC content. Improved hydrophobic property and mechanical strength were also obtained even with very low dosages of glyoxal (0.5%, wt) and AZC (2.5%, wt). This new type of starch with double functionalities (i.e., hydrophobic and UV blocking capacity) provides beneficial implications for improving the performance of starch-based materials.

Senast uppdaterad 2019-13-11 vid 04:18