Ash-forming elements in four Scandinavian wood species part 3: Combustion of five spruce samples

A1 Originalartikel i en vetenskaplig tidskrift (referentgranskad)


Interna författare/redaktörer


Publikationens författare: Werkelin J, Lindberg D, Bostrom D, Skrifvars BJ, Hupa M
Förläggare: PERGAMON-ELSEVIER SCIENCE LTD
Publiceringsår: 2011
Tidskrift: Biomass and Bioenergy
Tidskriftsakronym: BIOMASS BIOENERG
Volym: 35
Nummer: 1
Artikelns första sida, sidnummer: 725
Artikelns sista sida, sidnummer: 733
Antal sidor: 9
ISSN: 0961-9534


Abstrakt

Forest residue is the remaining fraction after the outtake of timber, which comprises the tree tops and branches. It may as fuel cause damage to the combustion device through ash slagging and fouling. The objective of this work was to model the ash composition from well-specified samples of a spruce tree: wood, bark, twigs, needles, and shoots. Their ash at 1000 degrees C was modelled using global chemical equilibrium calculations, and laboratory-made ash of the five samples was analyzed by XRD and SEM-EDXA. According to the results, the risk of slagging arises from the spruce foliage: molten alkali silicates from spruce needles and probably molten alkali phosphates from spruce shoots may cause problems in the furnace. Fouling caused by condensing alkali vapours can be produced by all five samples. The amount of alkali vapours in the flue gas was in the same order of magnitude for all five samples, in spite of large differences in their original alkali contents.


Nyckelord

Ash, Biomass, Equilibrium, Forest residue, Wood

Senast uppdaterad 2019-16-10 vid 03:01