Comparative evaluation of various lignin determination methods on hemicellulose-rich fractions of spruce and birch obtained by pressurized hot-water extraction (PHWE) and subsequent ultrafiltration (UF)

A1 Originalartikel i en vetenskaplig tidskrift (referentgranskad)

Interna författare/redaktörer

Publikationens författare: Risto Korpinen, Mari Kallioinen, Jarl Hemming, Andrey Pranovich, Mika Mänttäri, Stefan Willför
Förläggare: Walter de Gruyter
Förlagsort: Berlin
Publiceringsår: 2014
Tidskrift: Holzforschung
Volym: 68
Nummer: 8
Artikelns första sida, sidnummer: 971
Artikelns sista sida, sidnummer: 979
eISSN: 1437-434X


Various lignin determination methods have been applied to hemicellulose-rich wood extracts obtained after pressurized hot-water extraction (PHWE) and membrane ultrafiltration (UF). In focus were the chlorine number (Cl no.) method, the acetyl bromide method, and the four modifications of the Klason lignin determination, such as the KCL, TAPPI, LAP, and Goldschmid methods. The furfural (F) and hydroxymethylfurfural (HMF) concentrations in the acid hydrolysates were also determined. The mass balances of the fraction were calculated with respect to the contents of dry solids and lignin, including the acid-soluble lignin. The reliability of the methods was evaluated based on the lignin mass balances and the gross chemical composition of the extracts. Although the results were dependent on the method applied, the lignin mass balance calculations yielded similar results in general.


Acetyl bromide method, Acid-soluble lignin, Chlorine number, Furfural determination, Hydroxymethylfurfural (HMF) determination, KCL lignin determination, Klason lignin, Lignin determination, Membrane ultrafiltration of biomass, Pressurized hot-water extraction (PHWE), TAPPI method of lignin determination

Senast uppdaterad 2020-23-01 vid 05:28