Understanding NOx formation in pulp mill boilers

A1 Journal article (refereed)


Internal Authors/Editors


Publication Details

List of Authors: Markus Engblom, Emil Vainio, Anders Brink, Mikko Hupa, Erkki Välimäki, Ville-Pekka Heikkilä
Publisher: PAPTAC
Publication year: 2015
Journal: J-For: the Journal of Science and Technology for Forest Products and Processes
Journal acronym: J-FOR
Volume number: 5
Issue number: 6
Start page: 24
End page: 31
eISSN: 1927-632X


Abstract

This paper presents a model for calculation of NOx chemistry in pulp mill boilers. A detailed chemical kinetic mechanism is used in combination with a simplified description of furnace fluid dynamics. A reactor network is used to describe the mixing of furnace gas into the combustion air jets and the furnace gas flow between air levels. The model is applied to a 107 MWth bubbling fluidized-bed boiler (BFB) and a 3000 tds/day Kraft recovery boiler.

In the BFB, NH3 and NO in the furnace gas originating from the bed are entrained into the secondary and tertiary air jets, resulting in considerable NOx reduction in the jets and low NOx emissions from the boiler. In contrast, in the Kraft boiler, NOx precursor release is not restricted to the char bed, but takes place in a large furnace volume. In the Kraft boiler, NH3 is largely oxidized to NO between the air levels due to excess oxygen and high temperatures. In addition, the importance of NO release from carry-over droplets in boiler NOx emissions is evident.

For efficient in-furnace NOx reduction, NH3, NO, and O-2 should be simultaneously present in the furnace gas at a temperature favouring reduction. Such conditions can be obtained in the combustion air jets, provided that the entrained furnace gas contains NH3. Calculations suggest that extreme air staging would be needed to obtain such conditions in a recovery boiler.


Keywords

Bubbling fluidized bed, kraft recovery boilers, Mathematical modeling, Nitrogen oxides

Last updated on 2019-16-07 at 05:41