Modeling and simulation of a small-scale trickle bed reactor for sugar hydrogenation

A1 Originalartikel i en vetenskaplig tidskrift (referentgranskad)


Interna författare/redaktörer


Publikationens författare: Davide Durante, Teuvo Kilpiö, Petteri Suominen, Victor Sifontes Herrera, Johan Wärnå, Paolo Canu, Tapio Salmi
Publiceringsår: 2014
Tidskrift: Computers and Chemical Engineering
Volym: 66
Artikelns första sida, sidnummer: 22
Artikelns sista sida, sidnummer: 35
eISSN: 1873-4375


Abstrakt

Laboratory-scale trickle bed reactor was modeled and simulated, taking into account axial dispersion, gas–liquid, liquid–solid and internal mass transfer as well as catalyst deactivation under isothermal conditions. For catalyst particles dynamic and steady state models were developed, including both mass and heat balances. Catalyst deactivation was included in the model by using the final activity concept for the catalyst particles. A well-working numerical algorithm (method of lines) was applied for solving the reactor model with Matlab 7.1 and the results followed experimental trends very well. The steady-state reactor model was based on simultaneous solution of mass balances. The aim was to illustrate how these parabolic partial differential equations could be solved with a step-by-step calculation for a selected geometry. The final model verification was done against experimental data from the hydrogenation of arabinose to arabitol on a ruthenium catalyst.

Senast uppdaterad 2019-20-11 vid 04:23